To reset the alarm on the Ford Explorer You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.
Also, how do you turn off the anti theft system on a 2004 Ford Explorer? Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.
Also know, how do I turn off Ford anti theft system? Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.
Likewise, how do I get my car out of alarm mode?
- Method 1: Check the cylinder and key. Step 1: Check the key fob battery.
- Method 2: Turn on the ignition. If your engine has been locked up by the anti-theft system, you will be unable to start it.
- Method 3: Insert the key into your car’s door.
People ask also, how do you turn off the anti theft system on a 2002 Ford Explorer? The 2002 ford explorer anti theft can be reset by unlocking the car with the key, and putting the ignition on.Allow the driver’s door to be locked for at least 30 seconds, then use the key in the door cylinder to unlock it. This should clear anything that is wrong with the alarm system.
How do I get my 2001 Ford Explorer out of theft mode?
Press the panic button one time. Now, go to the driver’s side of Your car, and get inside. Place Your physical key into the ignition key hole, and turn it to the on position three times in a 10 second period. Now, start the engine, and the anti-theft system should be reset.
How do I permanently disable anti theft system?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
Will disconnecting battery reset anti-theft?
One last thing you can try if your car alarm is going off and you can’t get it to stop, but you can get under the hood is to disconnect the battery. By unplugging the battery for a few minutes, it will also reset the computer. All you have to do is disconnect the positive or negative terminal and wait.
How do I disable anti-theft key?
Insert the key into the ignition and turn it to the on position, which activates your accessories but not the engine. Leave the key in position for about 10 – 15 minutes. Step 3: Check the anti-theft light again. If it’s no longer blinking, turn the key back to the Off position and allow it to set for a minute or two.
How do you turn off a car alarm without a remote?
To stop your car alarm, simply put your key into the driver’s-side door lock and turn. If the alarm still doesn’t turn off, get inside and turn your key in the ignition. Starting up the car should silence the alarm.
How can I turn my car alarm off without a remote?
Turn the key in the door to unlock it. Some vehicles require that you turn the key to the left and some require you turn it to the right. If you hear the door unlock, your alarm is reset. Open the door and put the key in the ignition if your alarm sounds from unlocking the door.
Can you disable passlock?
The Passlock system on a Vehicles is the anti-theft system. The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. … While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.
How do you turn off the alarm on a 2003 Ford Explorer?
To disable the alarm on a 2003 Ford Explorer You will need to close the passenger side door and put the key in. Turn the ignition to on and the alarm should stop pinging. There is no way to turn it off permanently, however, if You can find the fuse that powers the alarm then You can shut it down.
How do I reset my Ford Anti theft system?
Turn the ignition to the off position and remove the second coded key from the ignition. After three seconds and before 20 seconds, insert the new uncoded key into the ignition. Turn the ignition to the on position and keep it on for at least 6 seconds. Remove the newly coded key from the ignition.