In order to reset the door ajar alarm, you must turn the ignition to the accessory position without starting the engine, wait five minutes, and then change the ecu fuse.
People ask also, how do you remove the ajar switch on a 2002 Ford Explorer?
- Remove the plastic cover around the door handle.
- Lift up the door switch panel from the front and remove.
- Remove three screws holding the door panel in place.
- Lift the panel enough to reach the electrical connector to the outside mirror switch.
Also, how do you test a door ajar switch?
Likewise, how do you fix a door ajar light on a 2003 Ford Expedition?
Also know, how do you turn off the liftgate ajar on a Ford Explorer? Disable the plug on the back gate in order to disable the door ajar alarm on the ford explorer. If inaccessible, a module may be located beneath the dashboard.
Contents
How do you turn off the lights when the door is open on a Ford Explorer?
By default, interior lights illuminates when you open the door on Ford Explorer. You can’t turn them off, there is no button or switch to turn them off.
How do you turn off the alarm on a 2002 Ford Explorer?
To reset the alarm on the Ford Explorer You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.
What does it mean when a door is ajar?
: slightly open left the door ajar.
How do you turn on the interior lights in a Ford Explorer?
the instrument panel dimmer button is pressed until the courtesy lamps come on. any of the remote entry controls are pressed and the ignition is off. The courtesy lamp can also be turned on and off manually by pressing the lens depression. the instrument panel dimmer button is pressed until the courtesy lamp comes on.
How do you know if your car door switch is bad?
- Door lock functions intermittently.
- Broken door lock button or rocker.
- Door locks do not function.
How do you fix a door sensor?
- Remove the old sensor. Use a screwdriver to disconnect the wires from the old sensor.
- Connect the new sensor. Use a screwdriver to connect the existing wires to the new door sensor.
- Mount the new sensor. Apply the new sensor to the door frame.
- Test the new sensor.
Does door ajar light drain battery?
On some vehicles, the trunk lid, rear hatch and even the hood can be part of the system. But the warning light system can sometimes malfunction. If this happens to you, it’ll be annoying — and if left unchecked, it could potentially drain your battery.
Where is the ajar fuse on a 2003 expedition?
The 2003 Ford Expedition will have two fuse boxes in the vehicle. The first is going to be under the hood and near the battery. This one is not going to contain the door ajar fuse. The one You will want is the second fuse boxAnd it’s going to be under the dashboard.
How do you change a ajar switch on a 2003 Ford Expedition?
How do you turn off the dome light in a Ford Expedition?
To turn the interior lights off in a Ford Expedition You will have to locate the dimmer switch which is on the dashboard. You will have to turn it all the way off until You feel it click which is the off position. You will notice that some of the lights do not turn off and this is a safety feature for the SUV.