Likewise, can you install a trailer hitch on a Ford Explorer? To add a trailer hitch to a 2018 Ford Explorer you will need only a few tools, a Draw-Tite 76034 trailer hitch and about 45 minutes to complete the installation. Follow these basic steps to begin hauling all kinds of hitch-mounted accessories with your Ford Explorer today.
Also know, what size hitch is on a 2017 Ford Explorer? The trailer hitch for a Ford Explorer is going to be A-Class three hitch and it will have a 2 X2 inch opening. This is the most common type of hitch used on consumer vehicles.
People ask also, does the 2017 Explorer have a tow package? (1) Explorer does not offer factory-installed towing equipment for this application; only available as dealer accessory. (2) Requires optional Class II Trailer Towing Package. (3) Requires optional Class III Trailer Tow Package and weight-distributing hitch.
Also, what does the tow button do on a 2017 Ford Explorer? The tow/haul button in a 2017 ford explorer engages the transmission tow/haul mode, which will reduce shift cycles, as well as increasing torque and engaging braking assist.
Contents
How much does it cost to install a hitch on a Ford Explorer?
So, if you have a late model Ford Explorer, expect to pay around $350 for your trailer hitch installation.
Do Ford Explorers have a hitch?
Your 2016 or 2017 Explorer may have a panel on the rear bumper that hides the trailer hitch. This panel can be easily removed by placing your hand under the center of the panel, lifting up and out, then placing your fingers behind the panel and gently pulling it off.
Does my Explorer have a tow package?
The Class III Trailer Tow Package is available on all models of the Explorer, even on models equipped with the standard turbocharged 2.3-liter EcoBoost four-cylinder engine; it’s standard on the ST and Platinum, and optional on base, XLT and Limited trims.
How do you remove a trailer hitch from a 2017 Ford Explorer?
Can a 2017 Ford Explorer tow a boat?
Yes, a Ford Explorer is rated for towing around 5,000 lbs, which is more than enough for a typical pontoon boat and trailer. Most pontoon boats will average around 2,200 lbs, while a trailer will weigh around 1,200 lbs, making a combined weight of 3,400 lbs, which is well within a Ford Explorers towing capacity.
What is the towing capacity of a 2017 Ford Explorer XLT?
2017 Ford Explorer Towing Capacity The 280-hp 2.3L turbo EcoBoost four-cylinder engine is available for the base and XLT and standard on the Limited. Expect a max towing capacity of 2,000 pounds in conjunction with front- and all-wheel drive.
What is a Class III trailer tow package?
The Class III Trailer Tow Package includes a Class III frame-mounted hitch and trailer connections. ST and Limited models featuring the 3.0L EcoBoost® engine offers a maximum towing capacity of 5,600 pounds. Timberline has this package standard with a towing capacity of 5,300 pounds.
How much can I tow with the 2.3 L EcoBoost engine?
2.3L EcoBoost® 4-Cylinder: Rated at 300 hp and 310 lb-ft of torque, this engine helps to Explorer to tow up to 5,300 pounds when properly equipped.
Can I pull a boat with my Ford Explorer?
When properly equipped, the 2019 Ford Explorer is capable of towing between 3,000 and 5,000 pounds, allowing you to tow your trailer or boat through Elk River with ease.
What size trailer can a Ford Explorer pull?
A 2019 Ford Explorer can tow any camper weighing up to 5,000 pounds while the newer 2020 Ford Explorer can tow up to 5,600 pounds! This means that a Ford Explorer can tow pop-up trailers, hybrid trailers, teardrop trailers, and some smaller travel trailers.