- Shut the car doors, then open the driver-side door. Press the UNLOCK button the driver-side door.
- Now, turn the ignition from OFF to RUN 8 times.
- Press any button on the Ford remote to program it.
- Have more than one key fob?
- Lastly, turn the ignition OFF.
Similarly, how do I program my 2016 Ford Explorer key fob?
Also know, can you program a Ford key yourself? First you will need both of the programmed keys that came with the vehicle. If you do not have both, you will not be able to program the key yourself. You will need to go to the dealer to have it done. If you have both keys, put one of the already programmed keys into the ignition.
People ask also, how do I program my 2010 Ford Explorer remote? INSERT key into Ignition and TURN from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode. Within 20 seconds press any button on first keyless remote fob. Door locks will cycle to confirm programming.
Amazingly, can you program a Ford key fob without the original? Here is the procedure you should follow to program a new Ford TRANSPONDER key – without the original for PATS1 cars only: Insert the new cut and unprogrammed key you have into the ignition cylinder and turn it to the “ON” position. Once the security light flashes, it will stay on for fifteen minutes.
- Enter your vehicle with your used remote and your ignition key with all of the doors and the trunk closed.
- Insert your key into the ignition.
- Turn the key to the “On” position, press the “Lock” button on your remote and return the key back to the “Off” position.
Contents
How do I reprogram my Ford key?
- Close the car doors, then open the driver-side door. Press the UNLOCK button on the driver-side door.
- Next, turn the ignition from OFF to RUN 8 times.
- Press any button on the Ford key fob to be programmed.
- Have a second remote Ford key fob?
- Finally, turn the ignition to OFF.
Can I program a transponder key myself?
You don’t need a professional transponder key programmer to help you program your transponder. You can do this by yourself, as long as you know the right procedure. The programming process isn’t complicated, but your type of car also determines that.
How do I reprogram my Ford PATS key?
Cycle key 1 to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.
How do you program a key fob for a 2012 Ford Explorer?
- Insert an existing working key into the ignition cylinder.
- Turn the ignition cylinder to ON (RUN) and back to OFF.
- Remove the existing working key and, within five seconds, insert a second working key and turn it to ON (RUN) then back OFF.
How do you program two key fobs?
How do you program a key fob for a 2004 Ford Explorer?
How do I program a new key without original?
- Insert original key and turn on.
- Wait 5 seconds or until flashing security light goes off.
- Within 10 seconds insert new key and turn on.
- Wait 5 seconds or until flashing security light goes off.
- Key is now programmed.