First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti–theft system.
People ask also, how do I get my Ford Explorer out of theft mode? To disable anti theft then get in vehicle and close the door. Put key in ignition and turn from off to run 8 times. On the eighth time leave in on position and the theft light will turn off.
Likewise, how do I get my car out of anti theft mode? Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
Also, how do I reset my Ford security system?
- Examine the remote entry key and find the loudspeaker icon. Press this icon to turn on the personal alarm.
- Press the loudspeaker icon one more time or put the key into the ignition and turn it to the “On” position to reset the alarm.
Also know, how do I reset my Ford Anti theft system with one key? Put one into the ignition, and turn it to “ON”. Cycle it back to “OFF” and remove. Immediately insert the second key (within 5 seconds) and cycle it to “ON” and “OFF” as well. Insert the original key back within 10 seconds, leave it “ON” for one second, and then cycle back to off.Allow the driver’s door to be locked for at least 30 seconds, then use the key in the door cylinder to unlock it. This should clear anything that is wrong with the alarm system.
How do I reset my anti-theft system?
Exit the car with all doors closed and the windows rolled up. Also close and any rear doors such as the trunk, rear hatch and front hood. Lock the car using the drivers side lock and walk away from the car at least ten feet. Wait for fifteen minutes and unlock the door, this should reset the security system.
Is my car in anti-theft mode?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem.
How do I reset my immobilizer?
To reset the immobilizer, hold down the panic button. Wait for ten minutes if you push the lock button two times.
Why is my security indicator light flashing?
If the Security Indicator Light is flashing with the key out of the ignition lock and accessory position, this is a normal sign that the alarm and the immobilizer system is active. While starting the car or key in the “run” position, the security lamp should illuminate briefly then go out.
How do I get my Ford Focus out of anti-theft mode?
One way is to put the physical key in the lock, and then turn it to the unlock position. Do this, without moving it away from that unlock position for about 30 seconds. After that, You can unlock the car and start the engine. This will trigger a reset of the system.
How do I fix my Ford Anti-theft system?
- Put the key in the ignition.
- Turn it to the on position, but don’t start the engine.
- Turn it back off again.
- Repeat this process eight times, leaving your key on with the final turn.
What triggers the anti-theft system in car?
The Anti-theft alarm system works with the help of sensors installed in and around the vehicle. An impact or the movements inside the car activates the sensors. This, in turn, triggers the Anti-theft alarm system and sounds the alarm. The alarm goes off and alerts the owner/people.
How do I bypass Ford anti-theft system?
Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.
How do I reset my Securilock passive anti-theft system?
- Enter your vehicle with your ignition key and remote and insert your key into the ignition.
- Turn the ignition key from “Off” to “Run” eight times in the first 10 seconds, and end the eighth turn in the “Run” position.
How do you bypass anti-theft on a 2000 Ford f150?
Press the power door unlock button three times in a row and then kill power to the vehicle. Once the power is off go ahead and hit the door unlock button three more times. Once You’ve done all this You can now give the vehicle power again and You’re going to hear the horn make a noise.