- Locate the “TRIP/RESET” button on your vehicle’s control switch. Press and hold the “TRIP/RESET” button to select the “SYSTEM CHECK” option.
- Depress the “TRIP/RESET” button then select “OIL LIFE RESET.” The message display will show “HOLD RESET IF NEW OIL.”
Likewise, how do you reset the oil light on a Ford Explorer? Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
Also, how do you turn off the check engine light on a 2006 Ford Explorer? Insert the key into the ignition to do this, turn the car on for about a second, then off for about a second. Do this two times more then drive the car as normal. This can be done by putting the car on and back off three times in quick succession.
Also know, how do I reset my 2006 Ford Explorer?
People ask also, how do you reset the oil light on a 2005 Ford Explorer?
- Press the SETUP button repeatedly until “Press Reset At Oil Change” message is displayed.
- Press and release the RESET button to display “Hold Reset To Confirm”
- Press and hold the RESET button to see “Oil Life Set To 100%”
The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.
How do you reset the oil change light on a Ford?
Press and hold the trip/reset button until the display reads “OIL LIFE SET TO 100%.” Turn the ignition to the “OFF” position. Start the engine and verify that the oil change required message is no longer displayed.
How do you clear an engine code?
How do I reset my check engine light without a scanner?
How do I permanently delete engine codes?
The only way to clear a PDTC is to fix the underlying problem with the vehicle that originally caused the PDTC and its corresponding DTC to set, and then allow the vehicle sufficient drive time to re-run the monitor that identified the problem in the first place.
What does the wrench light mean on a 2006 Ford Explorer?
The 2006 Ford Explorer wrench indicator light means you have a concern in the fly by wire throttle actuation. You no longer have a cable, but a computer controls the throttle for speed opening or a trans concern. The most common problem is the throttle position sensor on the throttle body is bad.
What type of oil does a 2006 Ford Explorer use?
Ford Explorer 4.0L 2006, SAE 5W-30 Synthetic Blend Motor Oil, by Motorcraft®. This product is made of high-quality components to meet and exceed strict quality requirements.
How do you reset the change oil light on a 2007 Ford Explorer?
How do you reset the service engine light on a 2003 Ford Explorer?
How do you reset the change oil light on a 2003 Ford Explorer?
- Press “SETUP” to access the System Check function.
- Press and release “RESET” to display “OIL LIFE XX%”.
- Press and hold “RESET” for 2 seconds to display “IF NEW OIL HOLD RESET”.
- Press and hold “RESET” to display “OIL LIFE SET TO 100%”.
How do you reset the change oil light on a 2002 Ford Explorer?
- Crank the Explorer’s engine or turn the key to the “ACC” ignition position. Push the “Setup” button to the right of the steering wheel.
- Push “Reset.” The screen will show “Oil Life – Hold Reset New”
- Press and hold “Reset” for two seconds.