Look on a side panel for a small, round button which you can pry off with a small screwdriver. Through this access hole you will be able to see the reset button on top of the inertia switch.
Also, how do you know if an inertia switch is tripped? if it tripped,then the button will pop up and all you need to do is push it back down until it clicks/stays down. it’s rare for the inertia switch to fail,but possible.
Likewise, should inertia switch be up or down? The only time the inertia switch should trip is during a collision. … With the inertia switch in the open position, the red button is raised up. It is not supplying power to the fuel pump in this position. When the reset button is pushed in (or down), then the inertia switch will let the voltage flow to the fuel pump.
People ask also, how do you bypass a Ford inertia switch?
Also know, how do you reset a fuel pump control module?
- Locate your car’s inertial trigger or airbag control module.
- Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case.
Contents
How do I reset my fuel cut off switch?
Turn the ignition switch OFF. Ensure that there is no fuel leaking in the engine compartment, along any of the lines or at the tank. There should be no odor of fuel as well. If no leakage and/or odor is apparent, reset the switch by pushing the reset button on the top of the switch.
Will a inertia switch reset itself?
Can an inertia switch reset itself? A good inertia switch should trip completely on a collision only(sudden stop or airbag deployment), so engine wouldn’t restart without a reset. And a good switch wouldn’t trip by being towed or hitting a bump, nor reset itself, so you could have a bad switch.
What triggers an inertia switch?
An inertial switch is a switch, firmly mounted upon a vehicle or other mobile device, that triggers in the event of shock or vibration. It is a part of electrical circuits that may either enable or disable some function.
Note: The fuel pump shut off switch reset button is usually located either under the dash in the driver compartment or under the driver or passenger seat. Just move the seat forward and pull back on the carpet or popping off the cover under the seat to access the switch.
Where is the inertia switch located?
The inertia switch is located behind the trim on the left-hand side of the vehicle, forward of the front door post, below the fascia.
How do you test an inertia switch?
In the event of an accident, the “Fuel Reset Button” will turn off the fuel pump and system.
How does Ford inertia switch work?
The switch activates when a tiny ball runs up a ramp, which is triggered during the sharp deceleration during an accident. The ball makes an electrical contact at the top of the ramp, and the electrical current to the fuel pump is discontinued. It is a safety item found on every modern fuel-injected vehicle.
How do you test a fuel pump control module?
How do I know if my fuel pump control module is bad?
- Engine won’t start. Your engine won’t run without fuel.
- Difficulty starting.
- Stalling.
- Poor performance.
- Check engine light.
- Abnormal noise.
- Restricted fuel filter.
- Dirt and debris.