Depress the “TRIP/RESET” button then select “OIL LIFE RESET.” The message display will show “HOLD RESET IF NEW OIL.”Press and hold the “TRIP/RESET” button for more than two seconds to reset the engine oil life. Once the procedure has been completed, “OIL LIFE SET TO 100%” will be displayed.
Also know, how do you reset the oil change light on a Ford Explorer? Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
People ask also, how do you reset the oil life on a 2007 Ford Explorer?
Also, how do you reset the oil light on a 2005 Ford Explorer?
- Press the SETUP button repeatedly until “Press Reset At Oil Change” message is displayed.
- Press and release the RESET button to display “Hold Reset To Confirm”
- Press and hold the RESET button to see “Oil Life Set To 100%”
Likewise, how do I reset my oil change light?
Contents
What does the wrench light mean on a 2007 Ford Explorer?
The wrench light on a 2007 Ford Explorer means that it is time for a service on the vehicle. Usually it will be something simple like an oil change, but could be more involved like a transmission fluid change. It is impertinent to always keep up on the maintenance with Your vehicle.
How do I reset my Ford Explorer?
- Open the hood: release the primary latch by pulling the release lever under the steering wheel near the floor board.
- Disconnect the negative battery terminal.
- Wrap the negative clamp in a towel.
- Leave the negative battery cable off for a minimum of five minutes.
What does the wrench light mean on a 2006 Ford Explorer?
The 2006 Ford Explorer wrench indicator light means you have a concern in the fly by wire throttle actuation. You no longer have a cable, but a computer controls the throttle for speed opening or a trans concern. The most common problem is the throttle position sensor on the throttle body is bad.
How do you reset the service engine light on a 2003 Ford Explorer?
How do you reset the change oil light on a 2003 Ford Explorer?
- Press “SETUP” to access the System Check function.
- Press and release “RESET” to display “OIL LIFE XX%”.
- Press and hold “RESET” for 2 seconds to display “IF NEW OIL HOLD RESET”.
- Press and hold “RESET” to display “OIL LIFE SET TO 100%”.
What does service engine soon light mean on a 2005 Ford Explorer?
When filling up at any gas station, shut the car off. The fuel/ evap system is typically a sealed system when the truck is running. When you are re-fueling, the “seal” is broken and over a period of time this can set the CEL light or service engine soon light.
Why is my change oil light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. … The next common cause is low oil pressure.
Why is my engine light on after oil change?
These lights can signal something serious or something as simple as a loose gas cap. … Oil changes are essential maintenance for your car but it won’t do anything that could trigger your check engine light to come on. If you notice the light after an oil change, something else is wrong.
Why does my change oil light keep coming on?
When the oil light on your dashboard comes on, it might mean your vehicle has low oil pressure. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.
How do I reset my Ford app?
Delete FordPass App from your phone and restart your phone. Master Reset Sync 3 (Settings, General, Scroll down to ‘Master Reset’, continue) Wait a good 5 minutes after the reset is complete for the system to settle. Ensure that remote connectivity is set to enabled in settings->fordpass app.