First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.
Also know, how do I reset my Ford Pats? To reset the pats system, turn on the ignition and hold reset for about 5 seconds until a word testt shows up. Then push reset repeatedly until it shows dtc and read the code if there is one. After done, turn the ignition off. It should reset automatically.
Also, how do I get my car out of anti theft mode? Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
People ask also, how do I reset my Ford anti-theft system? Turn the ignition to the off position and remove the second coded key from the ignition. After three seconds and before 20 seconds, insert the new uncoded key into the ignition. Turn the ignition to the on position and keep it on for at least 6 seconds. Remove the newly coded key from the ignition.
Likewise, how do I turn off the anti-theft system on my Ford Explorer? To disable anti theft then get in vehicle and close the door. Put key in ignition and turn from off to run 8 times. On the eighth time leave in on position and the theft light will turn off.
- Enter your vehicle with your ignition key and remote and insert your key into the ignition.
- Turn the ignition key from “Off” to “Run” eight times in the first 10 seconds, and end the eighth turn in the “Run” position.
Contents
How do I reprogram PATS system?
Is my car in anti-theft mode?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem.
How do I reset the security system on my car?
Cycle the key in the ignition from the “Off” position to the “On” position twice in a row. The alarm will emit a chirping sound after turning the ignition to the “On” position the second time. This will reset the alarm, making it ready for reprogramming (if necessary).
Can you disable passlock?
The Passlock system on a Vehicles is the anti-theft system. The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. … While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.
How do I get my Ford Focus out of anti-theft mode?
One way is to put the physical key in the lock, and then turn it to the unlock position. Do this, without moving it away from that unlock position for about 30 seconds. After that, You can unlock the car and start the engine. This will trigger a reset of the system.
How do I bypass Ford Anti-theft system?
Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.
How do I reprogram my Ford PATS key?
Cycle key 1 to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.
Will disconnecting battery reset anti-theft?
One last thing you can try if your car alarm is going off and you can’t get it to stop, but you can get under the hood is to disconnect the battery. By unplugging the battery for a few minutes, it will also reset the computer. All you have to do is disconnect the positive or negative terminal and wait.
How do I get my 2000 Ford Explorer out of theft mode?
Allow the driver’s door to be locked for at least 30 seconds, then use the key in the door cylinder to unlock it. This should clear anything that is wrong with the alarm system.
How do I get my 2001 Ford Explorer out of theft mode?
Press the panic button one time. Now, go to the driver’s side of Your car, and get inside. Place Your physical key into the ignition key hole, and turn it to the on position three times in a 10 second period. Now, start the engine, and the anti-theft system should be reset.