Depress the “TRIP/RESET” button then select “OIL LIFE RESET.” The message display will show “HOLD RESET IF NEW OIL.”Press and hold the “TRIP/RESET” button for more than two seconds to reset the engine oil life. Once the procedure has been completed, “OIL LIFE SET TO 100%” will be displayed.
People ask also, how do you reset the oil life on a Ford Explorer? Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
Also know, how do you reset the oil life on a 2005 Ford Explorer?
- Press the SETUP button repeatedly until “Press Reset At Oil Change” message is displayed.
- Press and release the RESET button to display “Hold Reset To Confirm”
- Press and hold the RESET button to see “Oil Life Set To 100%”
Also, how do you reset the oil life on a 2007 Ford Explorer?
Likewise, how do you reset the oil life on a 2008 Ford Explorer? In order to reset the oil change indicator light on a 2008 ford explorer sport trac, you should turn the ignition on without starting the engine, press and hold the select button for two seconds, and then press the button again until oil life reset and start value are displayed on the screen.The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.
How do you reset the oil life on a 2021 Ford Explorer?
How do you reset the oil change light on a 2003 Ford Explorer?
- Press “SETUP” to access the System Check function.
- Press and release “RESET” to display “OIL LIFE XX%”.
- Press and hold “RESET” for 2 seconds to display “IF NEW OIL HOLD RESET”.
- Press and hold “RESET” to display “OIL LIFE SET TO 100%”.
What does service engine soon light mean on a 2005 Ford Explorer?
When filling up at any gas station, shut the car off. The fuel/ evap system is typically a sealed system when the truck is running. When you are re-fueling, the “seal” is broken and over a period of time this can set the CEL light or service engine soon light.
How much oil does a 2005 Ford Explorer take?
Capacity: 6 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
What does the wrench light mean on a 2007 Ford Explorer?
The wrench light on a 2007 Ford Explorer means that it is time for a service on the vehicle. Usually it will be something simple like an oil change, but could be more involved like a transmission fluid change. It is impertinent to always keep up on the maintenance with Your vehicle.
How do you reset the oil light on a 2010 Ford Explorer Sport Trac?
- Turn the ignition to run, one position before starting engine.
- Press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display OIL LIFE RESET TO 100%.
How do you reset the oil light on a 2009 Ford Explorer?
How do you reset the oil life on a 2007 Ford Sport Trac?
How do you reset after oil change?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.