Also, how do you reset the oil life on a Ford Explorer? Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
Likewise, how do you reset the oil life on a 2014 Ford Explorer?
Also know, how do you reset the oil light on a 2012 Ford Explorer? To reset the oil level warning or maintenance light in your 2012 ford explorer vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and oil light should indicate a reset.
People ask also, how do I reset my oil life in a 2011 Ford Explorer?
The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.Contents
How do you reset the oil life on a 2015 Ford Explorer?
How do you reset the oil light on a 2014?
How do you reset the oil life on a 2010 Ford Explorer?
- Press and hold the SELECT/RESET stem for more than two seconds. Oil life is set to 100% and OIL LIFE SET TO 100% is displayed.
- Once OIL LIFE SET TO 100% is displayed, release, press and hold the.
- After setting the oil life start value, press the SELECT/RESET stem.
How do you reset after oil change?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.
Do you have to reset oil life after oil change?
Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine.
How do you reset the change oil soon light?
Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do I reset my Ford oil change?
How do you reset the service light on a 2014 Jeep Grand Cherokee?
How do you reset the oil life on a 2014 Jeep Grand Cherokee?
How do you reset the oil life on a 2010 Ford Sport Trac?
- Turn the ignition to run (one position before starting engine).
- Press SETUP to display OIL LIFE %.
- Press RESET button to display “HOLD RESET IF NEW OIL”.
- Press and hold the RESET button for more than two seconds.