How to update sync on ford?

1. Turn on your vehicle.
2. Connect to a trusted Wi-Fi network by going into Settings >Wi-Fi.
3. Select your network and enter the password.
4. Once you are connected, go back to Settings and select the General button, then tap Automatic System Updates, then tap Scan for Updates Now.

Furthermore, how do I check for Ford Sync updates?

1. Log in to your SYNC Owner account.
2. Visit the SYNC Software Updates page.
3. If you see a notification that says, “You have recently downloaded an update,” choose Confirm Update. You’ll be instructed on how to report your last successful installation so that we can keep you informed when new updates are available to you.

Also the question is, how do I update my Ford Sync 3?

1. Turn on the SYNC 3 system.
2. Connect to a trusted Wi-Fi network by going into Settings > Wi-Fi.
3. Select your network and enter your password.
4. Once connected, go back to the Settings screen and select the “General” button.
5. On the General Settings screen, tap the “Automatic System Updates” bar.

Additionally, does Ford charge to update sync? Download the latest SYNC® software update to a USB drive at no charge. You can then install the update in your vehicle.

Moreover, how do I update my SYNC?

1. Turn on your vehicle as power must remain stable during the update.
2. Plug the USB drive into USB port in the vehicle.
3. Press Menu.
4. Scroll to SYNC-Settings.
5. Press OK.
6. Scroll to Install on SYNC and press OK.
7. Select Yes to the prompt that appears on your screen.

Only vehicles with SYNC 3 or greater can update over Wi-Fi. … If the update is interrupted for any reason, it will continue where it left off the next time it connects to Wi-Fi. Your vehicle doesn’t have to be running for the update to start and/or complete. You must use an external Wi-Fi connection for this update.

Does SYNC 3 update automatically?

If your vehicle is equipped with SYNC 3 with navigation, you can set up the system to receive automatic software updates via Wi-Fi. Once set up, SYNC will automatically download new software updates whenever a version becomes available. … Select Settings on your vehicle’s SYNC 3 screen.

How long does it take for Ford Sync 3 to update?

Your VIN is needed to obtain the update for your vehicle. The vehicle can still be driven during the install, but the SYNC system may occasionally reboot for 60-90 seconds. The update process will take about 30-35 minutes to complete.

How often does Ford update navigation?

Updating the System Each year, a new navigation system map update is released to provide access to the latest information. A lot can change in 12 months, and in the last three years over 1.2 million miles of new roads have been added to the navigation system map.

Is Sync free for Fords?

The Capabilities of the Ford Sync Connect The advantage of Ford Sync Connect is that it comes at no additional cost because it goes through your phone. Like with some of the other telematics systems, you will need to subscribe to the service, and the cost can be as much as $200 per year.

Will disconnecting battery reset Ford Sync?

To perform a Hard Reset: With the ignition OFF, disconnect the power to the SYNC module buy either disconnecting the vehicle battery or the large 54 pin connector at the back of the module. Reconnect the power after 30 seconds. Turn the ignition on and wait for the system to boot.

Are Ford Sync map updates free?

Maps. … ford.naviextras.com helps you keep your map up-to-date and lets you drive with peace of mind by offering 5 years of free map update.

Why is Sync not working Ford?

Reset Connection In Sync On SYNC, turn Bluetooth Off, then On. Press the Phone button > scroll to System Settings > Press OK > scroll to Bluetooth Devices > Press OK > select Off > select On. If this does not work, continue to steps 3 and 4. Manually connect SYNC with the phone.

How do I reset my Ford Sync?

1. Remove the navigation chip or SD card, if applicable.
2. Touch the GEARS found on the lower right center of the home screen.
3. Touch the SETTINGS button of the menu.
4. Touch SYSTEM to access menu choices.
5. Scroll down to page 2 locate MASTER RESET.
6. Tap YES and SYNC will begin reset.

What happened to Sync My Ride?

Why was SYNC Services discontinued? SYNC Services relied on technology that is no longer being supported. While this technology was useful when the feature launched, it is no longer the best way to support owner needs. We will continue to focus efforts on new technologies.

Which version of SYNC do I have?

One of the easiest ways to tell what version of SYNC you have is to look at your center console. Click on the SYNC setup below that looks closest to what’s in your vehicle to see the included features. Or, just keep scrolling for a full run-down.