SAE 5W-20 and 5W-30 is the best viscosity grade for the 2013 Ford Explorer. Ford advises to use engine oils meeting the oil viscosity requirements SAE classifications and has the API Certification Seal. The engine oil capacity for the 2013 Ford Explorer 4.6L and 4.0L is 6 and 5 US quarts.
Also know, what oil should I put in my Ford Explorer? The 2.3L 4 -cylinder engine uses SAE 5W-30 and can hold 5.7 quarts. The 3.5L V6 prefers SAE 5W-20 filter and holds 6 quarts.
People ask also, how much oil does a 2013 Ford Explorer take? Capacity: 6 quarts. (with filter)After refill check oil level.
Also, does Ford recommend synthetic oil? Help keep the engine in your Ford or Lincoln vehicle running at its best with a synthetic motor oil that comes recommended by Ford Motor Company. Synthetic oil is engineered to create more lubrication and better performance in the engine of your Ford or Lincoln vehicle.
Likewise, how often should I change the oil in my 2013 Ford Explorer? An oil change is one of the most positive and vital services for your car. Synthetic oil constantly should be changed each 7,500 – 10,000 miles. Ford recommends getting your 2013 Ford Explorer oil & filter changed each 3,000-5,000 miles for conventional oil.When comparing 5w20 vs. 5w30 motor oil, the 20 indicates that the oil has a lower viscosity and is thinner at higher temperatures. … So, due to viscosity, 5w20 is a thinner oil during operating temperatures, whereas 5w30 is thicker during operating temperatures.
Contents
Does a Ford Explorer use synthetic oil?
An oil change is one of the most central and vital services for your car. Ford recommends getting your 2021 Ford Explorer oil & filter replenished every 3,000-5,000 miles for conventional oil. Synthetic oil frequently should be replenished every 7,500 – 10,000 miles.
Can 5w30 be used instead of 5w20?
Can You Use 5W-30 Instead of 5W-20? In theory, yes, you can switch from using 5W-20 to the 5W-30 because they have similar viscosity ratings. In fact, often, when you take your car to a mechanic for an oil change, they’ll put the 30 instead of the 20 because it’s thicker.
How do you change the oil on a 2013 Ford Explorer?
How do you reset the oil change light on a 2013 Ford Explorer?
What oil do Ford dealers use?
These engines need the slightly heavier – 5W-30 oil. When it comes to picking a brand, nearly any brand of oil will do as long as it’s the correct weight; however, Ford does prefer that its customers use the Motorcraft brand of oil.
What oil does Ford 3.5 EcoBoost recommend?
Most users recommend the Amsoil 5W-30 Signature Series for the 3.5 EcoBoost engine. Though it is overpriced, its features offer the best; it works on both old and new engines, it can perform at extreme temperature, it increases the fuel efficiency.
Should I use full synthetic or synthetic blend?
If you can afford it, choose a full synthetic oil. It is the best oil for any engine. Synthetic oil cuts down the hassles or oversights related to more frequent oil changes and deposits. If synthetic oil is too expensive, go with a blend or rotate between a full synthetic and non-full synthetic every other oil change.
Does a 2013 Ford Explorer use synthetic oil?
The 2013 Ford Explorer uses SAE 5w-20 or 5w-30 viscosity, fully synthetic motor oil. It has an oil capacity of 5.0 quarts in its engine.
How often should you get an oil change on Ford Explorer?
Every 7,500 to 10,000 Miles This is usually somewhere between 7,500 and 10,000 miles. After your first oil change it’s recommended that you never go longer than one year or 10,000 miles between your routine maintenance appointments and oil changes.
How often should I change my synthetic oil?
It’s recommended that you change synthetic oil every 7,500 – 15,000 miles, depending on the vehicle and the brand of synthetic oil used. To ensure you’re changing your oil at the proper intervals, always check your owners manual for more information.