- Switch the ignition over to the on position.
- Go to the SETTINGS menu.
- Scroll and select VEHICLE.
- Scroll down to OIL LIFE RESET.
- Press and hold the OK button.
- Shut the vehicle off and then start it back up and check the oil change light should be gone.
Also, how do you reset the oil life on a Ford Explorer? Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
Also know, how do you reset the oil life on a 2012?
Likewise, how do you reset the oil life on a 2013 Ford Explorer?
People ask also, how do you reset the oil life on a 2010 Ford Explorer?
- Get in the car and turn key to the on position.
- Go to the SETUP MENU HOLD RESET screen.
- Press and hold the SELECT/RESET button.
- Enter to the RESET FOR SYSTEM CHECK menu.
- Scroll to OIL LIFE.
- Hold down the SELECT/RESET button.
Contents
How do I reset my oil life?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the oil life on a 2012 Honda CRV?
- Turn the ignition switch to the ON (II) position.
- Select “Maintenance Info” using the arrow buttons, then press the SOURCE button.
- Select “Yes” using the +/- buttons, then press SOURCE button.
- The maintenance item code(s) will disappear and the engine oil life will reset to “100”
How do I reset my oil light?
How do you reset the oil life on a 2011 Ford Explorer?
To reset the ford explorer oil life light, put the ignition into on without starting engine. Use the pad on the steering wheel to scroll through the settings. Go to settings, vehicle, oil life reset. Push and hold ok.
How do you reset the oil life on a 2021 Ford Explorer?
How do you reset the oil life on a 2015 Ford Explorer?
How do you reset the oil life on a 2010 Ford Sport Trac?
- Turn the ignition to run (one position before starting engine).
- Press SETUP to display OIL LIFE %.
- Press RESET button to display “HOLD RESET IF NEW OIL”.
- Press and hold the RESET button for more than two seconds.
What does the wrench light mean on a 2010 Ford Explorer?
If You see the wrench light turn on in the dash of Your 2010 Ford Explorer this means that Your ECU has detected a fault. I recommend getting off the road as soon as possible because continuing to drive can cause more damage to Your SUV.
How do you reset the oil life on a 2006 Ford Explorer?
Depress the “TRIP/RESET” button then select “OIL LIFE RESET.” The message display will show “HOLD RESET IF NEW OIL.”Press and hold the “TRIP/RESET” button for more than two seconds to reset the engine oil life. Once the procedure has been completed, “OIL LIFE SET TO 100%” will be displayed.
How much oil does a 2007 Ford Explorer take?
Capacity: 5 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.