- Introduction.
- 1Locate your thermostat if you haven’t already done so.
- 2Place a bucket under where you’re going to be working.
- 3Remove the clamp.
- 4Pull off the hose.
- 5Remove the bolts that hold the thermostat housing in place and lift out the old thermostat.
- 6Lay the new gasket in place.
People ask also, where is the thermostat in a 2004 Ford Explorer? Follow the upper radiator hose to the front driver’s side of the intake manifold, where it meets the engine. This is where the thermostat housing on your Ford Explorer is located.
Also, how much is a thermostat housing for a Ford Explorer? How much does a ford explorer thermostat housing replacement cost? If You need to replace the thermostat housing on a Ford Explorer You will usually need to spend $150 to $200 depending on the labor rates in Your area. Usually the parts are about $75 to $85, and the labor is $75 to $115.
Also know, how do you change a thermostat on a Ford Explorer?
Likewise, is it hard to change a thermostat? But after a bit of research, I discovered that replacing a thermostat is pretty stinking easy. … Granted, each heating and air conditioning system will have unique requirements for connecting a new thermostat, but the general process is pretty much the same.
Contents
Why is my thermostat housing leaking?
A damaged thermostat housing will leak engine coolant when the engine is up to operating temperature. The leak could originate from a crack in the housing, or it could come from a broken seal between the housing and the engine.
What are the symptoms of a bad thermostat?
- Leakage from the mounting surface. Appearance: Seepage, drips or large coolant bleed marks on or around the mounting surface or on the housing.
- Rust and corrosion. Appearance: Rust and corrosion on the surfaces of the thermostat.
- Deposit build-up.
- Map-controlled thermostats.
How do you change a thermostat on a 1996 Ford Explorer?
How do you change a thermostat on a 2002 Ford Explorer?
- Ensure the truck is turned off and parked on a flat and level surface.
- Trace the hose to the thermostat housing.
- Unscrew the hose clamp with a flat-tip screwdriver.
- Unbolt the thermostat housing with a socket wrench.
- Pull the thermostat out of the housing.
What is the thermostat housing?
In many internal combustion engines the Thermostat Housing acts as the coolant outlet, it is normally located on the engine block or cylinder head. … As the name implies, this engine component houses the thermostat which regulates the coolant flow.
Where is the thermostat on a 2006 Ford Explorer?
How do you change a Ford thermostat?
How much does it cost to replace the thermostat housing?
A replacement thermostat housing will cost you around $50 to $250 on parts alone. Labor costs can range anywhere between $130 and $170. All in all, replacing your broken thermostat housing could cost you around $180 to $420.
How do you change a thermostat on a 2008 Ford Explorer?
Do I need an electrician to replace a thermostat?
Your best option is to have a C-wire properly installed and run to your new thermostat, which means it will require an electrician’s expertise. Even if you find a DIY article or video online, the risk to your health or home isn’t worth it when dealing electrical wiring.