The Ford Fusion transmission fluid capacity iS5. 7 quarts. The transmission fluid needs to be replaced every 30,000 to 60,000 miles.
Contents
How many quarts does a 2012 Ford Fusion take?
2012 Ford Fusion – SpecsEngine3.0-liter V6 FFV2.5-liter I-4Fuel capacity16.5 gallons (AWD)17.5 gallons17.5 gallons (FWD)Fuel Requirement87 octane unleaded87 octane unleaded or E85 capableOil Capacity5.5 quarts with filter5.0 quarts with filter13 autres lignes
How many quarts of transmission fluid do I need?
While performing a transmission service, where the pan is dropped and the filter replaced, 4 to 5 quarts of transmission fluid should be adequate to replace what was lost from the pan.
How much transmission fluid does a 2009 Ford Fusion hold?
2006 2007 2008 2009 2010 2011 2012 Ford Fusion Transmission Fluid CapacityTransmissionFluid capacityF21… TIV Automatic Transmission6 speed F21 Total Fill 7.4 quarts (7 L)CVT4.2 quarts (4 L)G6M (6-SPD) Manual transmission3.6 pints (2.8 L)6 speed 6F35 Automatic transmissionTotal Fill 9 quarts (8.5 L)1 autre ligne
What type of transmission fluid does a 2012 Ford Fusion take?
Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.
What kind of transmission fluid does a Ford Fusion take?
Motorcraft® MERCON® LV is a premium-quality automatic transmission fluid recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require MERCON® LV type fluid.
How do you check the transmission fluid on a 2012 Ford Fusion?
Open the hood (with the engine running). Locate the transmission dipstick, pull it out and wipe it off. Reinsert the dipstick and pull it back out. Make sure that the fluid is within the hot operating temperature range.15 déc. 2015
How often should you change transmission fluid Ford Fusion?
Every 150,000 miles: Change automatic transmission fluid, replace accessory drive belt, and replace timing belt.
What kind of engine does a 2012 Ford Fusion have?
The available engines are a 2.5-liter 175-hp I-4, a 3.0-liter 240-hp V-6, a 3.5-liter 263-hp V-6, and the 191-hp hybrid 2.5-liter I-4 drivetrain. Ford Fusion 0-60 mph times range from 8.9 seconds for the front-drive I-4-equipped Fusion SEL, to 6.8 seconds for both the front and all-wheel-drive Fusion Sport.
What happens if you put too much transmission fluid in?
If you add too much transmission fluid, you will notice that it may foam, and that can bring about erratic gear shifting. Some other problems that may arise include oil starvation and transmission damage. … Adding too much transmission fluid can also cause early failure and damage of parts as result of excess pressure.
How long should transmission fluid last?
between 30,000 and 60,000 miles
How many miles should I change my transmission fluid?
Most manufacturers recommend replacing transmission fluid every 30,000 to 60,000 miles. If you tow, or do mostly city driving with constant changes of gears, it may be wise to change your ATF even more often. Here’s why. Your automatic transmission has a lot of moving parts.
What type of transmission fluid does a 2009 Ford Fusion use?
For the 2009 Ford Fusion, you’ll want to use a Motorcraft Genuine Ford Fluid XT-10-QLVC MERCON-LV Automatic Transmission Fluid.29 août 2017
How do you check the transmission fluid on a 2009 Ford Fusion?
1. Pull out the dipstick. With the gearshift in Neutral or Park and the parking brake on, let your engine run.
2. Check the fluid.
3. Wipe the dipstick with a clean, lint-free rag; then reinsert it and pull it out again.
What kind of transmission fluid does a 2008 Ford Fusion use?
The 2008 Ford Fusion uses Mercon LV transmission fluid as standard in the car. This is recommended by Ford to provide You the best protection and lubrication for the gears in Your transmission. You should make sure to change Your fluid every 30,000 to 50,000 miles depending on the condition.