The 2013 Fusion The engine has a maximum capacity of 5.7 quarts. To lubricate its engine, Ford recommends using a sae 5w-20 fully synthetic motor oil, with the recommended viscosity standards being API certified.
Contents
What kind of oil does a Ford Fusion take?
Engine OilViscosity:5W-20 (Above -29) To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-20 oil meeting WSS-M2C947-B1.Capacity:5.7 quarts (with filter)After refill check oil level.Torque:21 ft/lbs (Oil Drain Plug)
Can I use 5W30 instead of 5w20 in my Ford Fusion?
Ford specifies only one viscosity rating for this vehicle, namely SAE 5W-20. … But, the statement from Ford also implies that use of oil other than 5W-20, such as 5W-30, will reduce the service life (“durability”) of the engine. Consequently, I would stick with the 5W-20. Synthetic oil is much preferred, of course.20 avr. 2017
How many quarts of oil does a 2013 Ford Fusion 1.6 take?
The 2013 Ford Fusion 1.6 EcoBoost has an engine oil capacity of 4.3 quarts. For recommend used Motorcraft SAE 5W30 5W-30 Premium Synthetic Blend or Full Synthetic motor oil. Any synthetic or synthetic blend can be used as long as it meets Ford specification WSS-M2C945-A and displays the API Certification.
Does Ford Fusion use synthetic oil?
Ford officially recommends that the Ford Fusion use full synthetic oil 5W-20 in normal climates, and OW-20 in extremely cold climates. However, depending on your driving habits and location this may not be a necessity. … Keep reading to learn how to tell if conventional oil is right for your vehicle!
Where is the cabin air filter in a 2013 Ford Fusion?
The cabin air filter is located in the HVAC blower motor housing which is behind the glove box. Open the glove box and empty out the contents. Gently pull off the plastic trim panel on the outside edge of the dashboard.
Does Ford recommend synthetic oil?
Help keep the engine in your Ford or Lincoln vehicle running at its best with a synthetic motor oil that comes recommended by Ford Motor Company. Synthetic oil is engineered to create more lubrication and better performance in the engine of your Ford or Lincoln vehicle.
What oil do Ford dealerships use?
These engines need the slightly heavier – 5W-30 oil. When it comes to picking a brand, nearly any brand of oil will do as long as it’s the correct weight; however, Ford does prefer that its customers use the Motorcraft brand of oil.12 juil. 2017
What happens if you put the wrong oil in your car?
Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so. Contrary to what some believe, adding synthetic oil to regular oil won’t harm the engine, but there’s also no benefit in doing so.
What happens if you use 5w30 instead of 5w20?
If you put in 5W-30 oil instead of 5W-20 when the latter is the grade suggested by your vehicle’s manufacturer, damage to internal engine parts can occur. Additionally, your engine may experience performance issues such as diminished fuel economy and horsepower.
What happens if you mix 5w30 and 5w20?
What Actually Happens When You Mix 5W30 with 5W20? Nothing serious is going to happen. The oils will come together, but they are unlikely to blend into a single oil; so, they’d stay and flow separately. … Also, as said earlier, it would be best if the two oils you’re about to mix are from the same brand.
Can you switch from 5w20 to 5w30?
Can you mix 5w20 and 5w30 synthetic oil? Yes, you can. It is best if they are from the same brand and level of API service to be the same formulas, but they are certainly compatible, even if different formulas and brands.26 mar. 2021
How much oil does a 2013 Ford Fusion Titanium take?
Engine lubricant oil capacity:5.2 liter / 5.5 U.S. qt / 4.6 imp. qtwith filter changeEngine coolant capacity:Fuel tank capacity:62 liter / 16.4 U.S. gal / 13.6 imp. gal1 autre ligne
How do you reset the oil change light on a 2013 Ford Fusion?
Does a 2013 Ford Fusion have a CVT transmission?
The new 2.0-liter turbo is rated 22/33 mpg. The Fusion Hybrid model pairs a 2.0-liter four-cylinder with an electric motor and an electronically controlled continuously variable transmission (CVT). … The 2013 Fusion is built on an all-new platform, which Ford says is more rigid and safer than before.