Motorcraft Air Filter FA-1884.
Contents
What type of oil does a 2010 Ford Fusion take?
5W-20
Where is the oil filter on a 2010 Ford Fusion?
How many quarts of oil does a 2010 Ford Fusion SE take?
The 2010 Ford Fusion oil type and capacity iS5w-20 and 5.3 quarts. Having high quality oil is important for the engine to run smoothly.
How do you reset the oil change light on a 2010 Ford Fusion?
Where is the air filter on a 2012 Ford Fusion Hybrid?
Can I use 5W 30 instead of 5w20?
In general, you can use 5w30 motor oil instead of 5w20. The 5w30 motor oil is more viscous than the 5w20. If the oil is more viscous, it will provide more protection against friction because it is more resistant to heat and does not easily break down.
What oil does a 2010 Ford Fusion 3.0 take?
Engine OilViscosity:5W-20 (All TEMPS)Capacity:6 quarts (with filter)After refill check oil level.Torque:19 ft/lbs (Oil Drain Plug)
How do you change the transmission fluid on a 2010 Ford Fusion?
Does Ford Fusion require synthetic oil?
Does Ford Fusion require synthetic oil? The full synthetic oil is recommended for the Ford Fusion , an expensive oil change but very much required in keeping the engine remain as good as new for a long time.18 fév. 2021
Where is the oil filter on a Ford Fusion?
The oil filter is located just in front of the oil pan. Slide the used oil catch container to just below the oil drain bolt. Loosen the oil drain bolt by turning it counterclockwise with a 15mm socket and 3/8″ drive ratcheting wrench.
How do you check the oil on a 2010 Ford Fusion?
How much oil does a 2010 Ford Fusion Sport take?
Capacity: 5.5 quarts (with filter)After refill check oil level.
How many quarts does a Ford Fusion take?
Regular Oil Changes and Service Your Fusion will use up to six quarts of oil.
How do you reset the oil life on a Ford Fusion?
1. Turn the ignition to the “ON” position, but do not start the engine.
2. Use the directional pad on the steering wheel and scroll through the settings area under the heading menu.
3. Go to Settings >
4. Vehicle >
5. Oil Life Reset.
6. The Remaining Oil will Display.