The 2013 Fusion The engine has a maximum capacity of 5.7 quarts. To lubricate its engine, Ford recommends using a sae 5w-20 fully synthetic motor oil, with the recommended viscosity standards being API certified.
Contents
How much oil does a 2013 Ford Fusion hold?
5.7 quarts
What oil is best for a Ford Fusion?
Ford Fusion engine oil 5w-30 For new Ford Fusion cars, for cars with less than 100,000 miles, we recommend to use engine oil viscosity 5w-30, API SN, API SP classification.19 mar. 2021
Does Ford Fusion require synthetic oil?
Does Ford Fusion require synthetic oil? The full synthetic oil is recommended for the Ford Fusion , an expensive oil change but very much required in keeping the engine remain as good as new for a long time.18 fév. 2021
Where is the cabin air filter in a 2013 Ford Fusion?
The cabin air filter is located in the HVAC blower motor housing which is behind the glove box. Open the glove box and empty out the contents. Gently pull off the plastic trim panel on the outside edge of the dashboard.
Does the 2013 Ford Fusion have a turbo?
The least expensive 2013 Fusion models will be powered by the same naturally aspirated 175-hp, 2.5-liter four that was standard on the outgoing model. … The 2.0 turbo engine will power all Fusions equipped with the optional all-wheel-drive system.25 sept. 2012
How fast can a 2013 Ford Fusion go?
2013 Ford Fusion SE FWD 0-60 Times, Top Speed, Specs, Quarter Mile, and WallpapersNameSE FWDTop Speed191 km/hAcceleration 0-100 km/h (0-60 mph)10.9 sFuel TypeFuel Consumption (City)9.2 L/100km25 autres lignes
Can I use 5w30 instead of 5w20 in my Ford Fusion?
Ford specifies only one viscosity rating for this vehicle, namely SAE 5W-20. … But, the statement from Ford also implies that use of oil other than 5W-20, such as 5W-30, will reduce the service life (“durability”) of the engine. Consequently, I would stick with the 5W-20. Synthetic oil is much preferred, of course.20 avr. 2017
Can I use 5w30 instead of 5w20?
In general, you can use 5w30 motor oil instead of 5w20. The 5w30 motor oil is more viscous than the 5w20. If the oil is more viscous, it will provide more protection against friction because it is more resistant to heat and does not easily break down.
Does Ford recommend synthetic oil?
Help keep the engine in your Ford or Lincoln vehicle running at its best with a synthetic motor oil that comes recommended by Ford Motor Company. Synthetic oil is engineered to create more lubrication and better performance in the engine of your Ford or Lincoln vehicle.
What brand oil does Ford recommend?
Ford Motor Company always recommends Motorcraft brand oil in the appropriate weight recommended for your vehicle. The Motorcraft brand is FoMoCo’s “in house” parts and service brand. No other oil is “recommended” by FoMoCo. That being said, the other answers to your question are correct.
What type of oil does a Ford Fusion 2019 take?
For both models, Ford suggests using an oil with sae 5w-20 viscosity levels, although sae 5w-30 is perfectly acceptable as well. For best results, they recommend purchasing oils from a reputable brand, such as Motorcraft.
When should I change the oil in my 2020 Ford Fusion?
Ford recommends getting your 2020 Ford Fusion oil & filter changed all 3,000-5,000 miles for conventional oil. An oil change is one of the most necessary and vital services for your car. Synthetic oil usually should be changed all 7,500 – 10,000 miles.