The oil filter is located just in front of the oil pan. Slide the used oil catch container to just below the oil drain bolt. Loosen the oil drain bolt by turning it counterclockwise with a 15mm socket and 3/8″ drive ratcheting wrench.
Contents [hide]
How many quarts of oil go in a 2010 Ford Fusion?
The 2010 Ford Fusion oil type and capacity iS5w-20 and 5.3 quarts. Having high quality oil is important for the engine to run smoothly. You will run into issues with the oil at some point. Bad oil can cause the engine to stop working.
Where is the engine oil filter located?
Find the oil filter by looking for a metal cylinder attached to the engine block. Look on the top, bottom, and sides of the engine to locate the filter attached to an outlet coming from the engine block. The filter is often black, white, blue, or orange and labeled as a filter.
What kind of oil filter does a 2010 Ford Fusion need?
Motorcraft – Original Equipment Oil Filter (Part No. FL-500S)
What is the best oil for a Ford Fusion?
Ford Fusion engine oil 5w-20 For new Ford Fusion cars, for cars with less than 75,000 miles, we recommend to use engine oil viscosity 5w-20, API SN, API SP classification.19 mar. 2021
How often should I change my oil Ford Fusion?
Approximately every 6,000 miles
Can I use 5W 30 instead of 5w20?
In general, you can use 5w30 motor oil instead of 5w20. The 5w30 motor oil is more viscous than the 5w20. If the oil is more viscous, it will provide more protection against friction because it is more resistant to heat and does not easily break down.
Does Ford Fusion require synthetic oil?
Does Ford Fusion require synthetic oil? The full synthetic oil is recommended for the Ford Fusion , an expensive oil change but very much required in keeping the engine remain as good as new for a long time.18 fév. 2021
How do you reset the oil change light on a 2010 Ford Fusion?
What happens if you change the oil but not the filter?
If the oil filter is not changed periodically, the filter can become severely clogged, reducing the volume of oil passing through the filter and into your engine. Without this oil, your engine can suffer severe damage. … However, the oil would be dirty, unfiltered oil that has bypassed the oil filter.
Can I change engine oil myself?
Frequent oil and filter changes are essential in increasing the life of your car and its performance. When it comes time for that needed motor oil change (consult your owner’s manual for mileage intervals), you have options: You can take it to a service station, quick lube or car dealer, or you can do it yourself.
Do you take the oil filter off first?
Removing the filter always causes oil spillage as the oil queued up for the filter will drain out when it is removed. Plus there’s whats in the filter itself. Put a pan under the filter and you’ll catch the run off. In short, it doesn’t matter if you drain the oil first or replace the filter first.1 nov. 2012
What happens if you put the wrong oil in your car?
Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so. Contrary to what some believe, adding synthetic oil to regular oil won’t harm the engine, but there’s also no benefit in doing so.
Does Ford recommend synthetic oil?
Help keep the engine in your Ford or Lincoln vehicle running at its best with a synthetic motor oil that comes recommended by Ford Motor Company. Synthetic oil is engineered to create more lubrication and better performance in the engine of your Ford or Lincoln vehicle.
What oil do Ford dealerships use?
These engines need the slightly heavier – 5W-30 oil. When it comes to picking a brand, nearly any brand of oil will do as long as it’s the correct weight; however, Ford does prefer that its customers use the Motorcraft brand of oil.12 juil. 2017