Switch the ignition ON, the SRS light will appear for six seconds then OFF for four seconds. When the light goes OFF, REMOVE the paperclip. When the light comes ON, put the paperclip back IN. Once more, when the light goes OFF, REMOVE the paperclip.
Amazingly, how do I reset airbag warning light?
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
Moreover, how do you turn off the airbag light on a 2005 Honda Odyssey? Place the key into the ignition and turn it on, but don’t allow the engine to turn over while still holding the wires together. Watch as the SRS light blinks on then turns off. Separate the wires right away and the SRS light will turn back on.
Furthermore, why is my airbag light on in my Honda Odyssey? Generally, the SRS light only flashes on when the vehicle has been in an accident. If it turns on when there has been no accident, it means the airbag system is malfunctioning and the vehicle should not be driven. But once you have the vehicle fixed, you can reset the light.
Beside above, is it illegal to drive with airbag light on? It is not safe to drive with the airbag light ON. When the light is on, it means that there is a problem with the airbag system. When there is a problem with the system, it will not deploy the airbags at all in an accident. It is always recommended to repair the problem as soon as possible.Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. … Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.
What is a SRS light?
If the SRS light illuminates while you are driving, it signals there’s an issue with the car’s airbag system. It also means that the airbags may not deploy if you’re in an accident. If the light comes on, take your car to get the SRS sensor checked as soon as possible.
How do I fix the SRS light on my 2002 Honda Odyssey?
What is Honda SRS light?
The car’s onboard computer will turn on the Supplemental Restraint System (SRS) Warning Light if the system will not operate properly or operate outside of intentions. This system is designed to deploy air bags and tighten seat belts when the computer determines the car is in an accident.
How do you reset the airbag light on a Honda Odyssey?
Switch the ignition ON, the SRS light will appear for six seconds then OFF for four seconds. When the light goes OFF, REMOVE the paperclip. When the light comes ON, put the paperclip back IN. Once more, when the light goes OFF, REMOVE the paperclip.
What does TCS mean on a Honda Odyssey?
Page 1. Your Honda is equipped with a Traction Control System (TCS) to assist you in maintaining traction while driving slowly on loose or slippery surfaces. The TCS assists only in low-speed, low-traction conditions; up to approximately 18 mph (30 km/h). TCS monitors the speed of all four wheels.
How do you read the SRS code on a Honda?
What should I do if my airbag light is on?
The bottom line is that, when your airbag light comes on, it’s vital that you don’t drive any further and have your car checked by a mechanic as soon as possible. Until the problem is diagnosed and fixed, your airbags will not deploy.
What does it mean when airbag light stays on?
The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.
Can you sell a car with the airbag light on?
You can sell it, but if someone asks about the airbag light, you should tell them what you know about it.
Can you clear airbag codes?
No, scanners cannot clear these codes. These codes are stored after a vehicle accident and are also known as crash data. Also, these codes are hardware issue codes. Hard Codes require professional reset services like us.