- Open trunk.
- Remove the cover and access the back of the tail light assembly.
- Disconnect the electrical wire.
- Remove the brake light socket by turning it counterclockwise.
- Remove the brake light bulb from the socket by pulling it out.
- Install the new brake light bulb into the socket.
Contents
How do you change a brake light on a 2013 Hyundai Sonata?
How do you change a brake light on a 2016 Hyundai Elantra hatchback?
Can you change a brake light yourself?
Changing a faulty brake light is something anyone can learn to do. A replacement bulb costs about $10, and replacing it on your own will save about $20 in labor and the time it takes to travel to the shop and wait for the work to be done.
How do I check brake lights by myself?
How do you turn off the emergency brake on a Hyundai Sonata?
How do you change a brake light on a 2017 Hyundai Elantra hatchback?
How do you change a brake light on a 2018 Hyundai Elantra?
Does O’Reilly change brake lights?
Wiper Blade & Bulb Installation – Free Our Parts Professionals will install wiper blades and replacement bulbs free of charge (with purchase of wiper blades or bulbs). Whether you’ve bought front or rear wipers (or both), headlights or tail lights, we’d be happy to install them for you.
Does Walmart replace brake lights?
Unfortunately, Walmart Auto Care Centers do not service any aspects of a vehicle’s brakes—including brake pads, sensors, brake fluids, taillights, and brake lights. Walmart does not install brake lights, they do sell replacement brake light bulbs, so you can purchase a replacement to install yourself.
Is it illegal to drive with a brake light out?
No brake lights penalty If you have a single brake light out for example and the police officer is of reasonable mind, they may simply pull you over and give you a verbal warning to get it fixed as soon as possible.
Where is the brake light switch located?
In most cars, the brake light switch is installed right above the brake pedal. Inside, it has a one- or two-way electric switch.
What does the brake light mean on Hyundai Elantra?
Bad Switch: One common reason for the Parking Brake light to stay on is a failing or failed switch. This can be checked easily by jiggling the handle after it is down. If the light turns off (or turns off and then back on), the switch is the most likely culprit and will need to be replaced.
Why would both brake lights go out?
If one or more of your brake lights isn’t working properly, it could mean one of three things: The brake light system fuse is blown, the brake light bulbs are burned out or the brake light wiring switch is broken. All of these issues are easy to troubleshoot.
How do you release the parking brake on a Hyundai?
Manual release To release the electronic parking brake, press the brake pedal and push the electronic parking brake switch down.
How do you release an electronic parking brake?
With the AUTO switch OFF, the EPB can be applied by pushing and holding the parking brake switch. This will work with the ignition switch ON or OFF and with the vehicle moving or stationary. To release the brake, pull and hold the manual switch while at the same time pressing the brake pedal.