Stick the key to your Hyundai into the vehicle’s ignition cylinder. Turn the key to the “ACC” or “Accessory” ignition position. Hold down the “Open” or “Unlock” button on the keyless entry FOB until the vehicle’s lights flash. The keyless entry FOB is now reprogrammed to your Hyundai vehicle.
Contents
Can I program my own Hyundai key fob?
If you are purchasing a new Hyundai, you will need to visit a Hyundai service center to have an expert technician program the key fob to your vehicle instead. Reprogramming your Hyundai’s key fob is relatively simple, but the experts at our dealership are always here to assist if you have questions or need help.
How can I program my key fob myself?
- STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
- STEP 2-Press the lock button.
- STEP 3-Turn off the ignition.
- STEP 4-Repeat the process with other key fobs.
- STEP 5-Restart the process.
Where is the smart key holder in a Hyundai Elantra 2013?
Each Hyundai model that is equipped with Smart Key has a holder location. Usually, it is in the center console or the glove compartment. If you insert your key into that area, you’ll be able to start your vehicle and operate your Smart Key.
Does a 2013 Hyundai Elantra key have a chip?
There is no chip inside the key of a 2013 Hyundai Elantra. It does NOT require progRamming. To fit Your vehicle’s ignition and door locks, it must be cut by Your Hyundai / Kia dealer or a local car locksmith.
How much does Hyundai charge to program a key fob?
We paid just $79.95 for an official Hyundai fob (replete with Hyundai logo on the back), versus the $236.45 the dealer would have charged us. The caveat was that this advanced “smart” key fob needed to be programmed by a dealer or locksmith.
How do I find my Hyundai key code?
Vehicle PIN code can be obtained through www.PATSCode.com service or through Hyundai dealer. – Key coding procedure is available in control unit IMMO – Immobilizer from “ECU Programming/Coding” menu.
How do dealers program key fobs?
All key fobs need to be programmed. Some dealerships will do it for free, while others will charge a half-hour to an hour of labor. But there is a way around this fee. Most key fobs can be programmed with a specific combination of button presses on the remote and key turns in the ignition.
Can AutoZone program a key fob?
Does AutoZone Program Car Remotes or Key Fobs? Well yes and no. AutoZone and many of the other big box auto parts retailers do have car remotes and key fobs to sell. They come with instructions to self-program those remotes in.
Why is my car not detecting my key fob?
Reasons your car won’t detect the key fob the battery inside the remote is dead. the remote itself is broken or no longer programmed to your car. the car battery is low. the keyless operation system is faulty.
How do you start a Hyundai Elantra with smart key?
How do I setup my Hyundai key card?
- Start your vehicle.
- Make sure you have your primary smartphone with the Hyundai Digital Key app loaded in the vehicle.
- In the app, select the Pair NFC Key Card via BLE section from the side menu.
- Place your card on the wireless changer.
- Pairing will occur automatically.
Does every key fob have an automatic starter?
Most key fobs actually have the remote start engine start button. … Other key fobs have a similar button in place but they come with a different sequence to start the engine remotely.
Does 2013 Hyundai Elantra have remote start?
WHAT YOU NEED TO KNOW – This is a complete remote starter kit for 2011-2013 Hyundai Elantra – Push-to-Start – Gas. The kit includes an all-in-one remote start bypass module which reduces the amount of wire connections required to the vehicle. Firmware is pre-loaded and ready to be programmed into your vehicle.