- Put the key in the ignition and turn to the ‘ON’ position.
- Do not start the car.
- Press and hold the Tpms reset button until the tire pressure light blinks 3 times.
- Release the Tpms button.
- Start the car.
- Wait 20 minutes for the sensor to reset.
Contents
How do you reset the tire pressure light on a Hyundai?
Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel.
How do you reset the low tire pressure light on a 2018 Hyundai Elantra?
The 2018 Hyundai Elantra TPMS button is placed under the steering wheel. To reset the sensor, holding the tire pressure indicator button until the TPMS light flashes three times, and then release it. Start the car and let the sensor reload for 20 minutes.
How do you reset the tire pressure light on a Hyundai Elantra 2019?
First, locate the reset button which can be found on the left hand side of the vehicle, underneath the dashboard. Push and hold the button until the low tire pressure light flashes on and off three times. Once its done blinking, Your vehicle will enter calibration mode.
How do you reset the tire pressure light on a 2016 Hyundai Elantra?
To reset the tpms on the 2016 hyundai elantra make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes.
How do you reset the tire pressure light on a 2011 Hyundai Elantra?
Look in the area to the right lower side of Your steering wheel, and You should see the reset button. Press the button one time, then wait for a count of 10 minutes. The light should flash, then reset. To reset the tpms on the 2011 hyundai elantra make sure the tire pressure is correct, then turn on the vehicle.
How do you reset the TPMS on a 2015 Hyundai Elantra?
To reset the 2015 hyundai elantra tire pressure light press and hold the tpms reset switch until it blinks three times.
How do you reset the tire pressure light on a 2017 Hyundai Elantra?
To reset the 2017 hyundai elantra tpms, press the tpms reset button and keep it until the light flashes three times, and then release it. Start the car and let the sensor run for 20 minutes. Typically, you can consider the tire pressure control reset button under the steering wheel.
How do you turn off the low tire pressure light on a 2017 Hyundai Elantra?
You should press and hold the TPMS reset button on Your dash while the vehicle is running. Keep holding the button until the light flashes three times and then let go of it.
Why is my tire pressure light still on after filling tires?
If you’ve added air but the air pressure warning light stays on, there’s a problem with your Tire Pressure Monitoring System or you have a slow leak. … Quick Tip: If the TPMS warning light comes back on after you’ve filled the tire with air, recheck the tire to make sure it is inflated to the proper air pressure.
How do you reset the dash light on a Hyundai Elantra?
- Start the vehicle.
- Press and hold the “OK” or “RESET” button (varies by model) for 5 seconds.
- Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.
Why wont my tire pressure light go off?
When the TPMS warning light comes ON and stays ON, this indicates a low tire pressure condition in one or more tires. … Remember that one or more of the tires may be low in pressure, so you should always check the pressure in all of your tires.
To reset the tpms on the 2013 hyundai elantra make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes.
How do you reset the 2013 hyundai elantra?
Turn the ignition to Off and then start the vehicle to verify that the reset has been completed and saved. To reset the oil life light in a 2013 hyundai elantra you will start the vehicle. Press and hold the ok button for 5 seconds. Release the ok button, then press and hold it again for 1 second.
How do you reset the tire pressure light on a 2013 Hyundai Sonata?
To reset the tire pressure monitor or tpms system in your 2013 hyundai sonata vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.