To do a soft reboot of Your touch screen in Your 2018 Jeep Grand Cherokee You’ll need to hold down the enter and volume buttons for 15 to 25 seconds. After this time has passed the screen will flash and then it should come back on and work like normal.
Amazingly, why is my Jeep Cherokee screen not working? The Jeep Grand Cherokee touchscreen not working can be due to multiple different things such as a short or disconnected power cable under the dash, a software glitch or issue, and it could also be a blown fuse or damage to the screen.
As many you asked, how do I fix my Uconnect touch screen?
- Press the phone and voice activation buttons for 10 to 20 seconds.
- Your UConnect will show your Jeep trim logo and switch off.
- Your screen will switch on again showing your trim logo.
- Your UConnect system is now reset.
Furthermore, how do I reset my Jeep Uconnect screen? Ensure your vehicle is in park and in “Run” mode. Press and hold down the volume and tuner knob buttons at the same time. Hold down the knobs for 10 – 20 seconds. After holding down the knobs, the screen should flash your vehicle brand name and then go dark.
Considering this, how do you soft reset Uconnect?
- Turn your key in the ignition to “Run,” but leave the car in park.
- Simultaneously press the volume button and the tuner knob at the same time.
- Continue pressing them down for 10 – 20 seconds.
Contents
What to do if Uconnect is not working?
- Use a compatible phone with Uconnect.
- Verify the Bluetooth version on your phone.
- Enable Bluetooth on your phone.
- Turn on the car stereo and enter the Bluetooth pairing code.
- Pair the mobile phone with Uconnect.
Why is my screen black on my Jeep?
An all black screen usually indicates a failure of wiring. The touch screen / head unit isn’t getting power, so it’s unable to display. A blue screen indicates a software failure — there’s not much You can do without having a dealership reflash the manufacturer’s software.
How do I turn on the radio in my Jeep Cherokee?
For some models of jeep grand cherokee you can: press the start button twice without pressing the brake pedal, it will put your vehicle in intermediate operation before starting the engine to turn on the radio again.
How do I reset my Jeep Grand Cherokee radio?
In order to do this You will need to press and hold both the temperature up and temperature down buttons on the driver side of the controls. Do not let go until the display changes to the engineering menu. Scroll down in the menu until You see Reset to factory default and press it.
How do I clean my UConnect screen?
Do not spray any liquid or caustic chemicals directly on the screen! Use a clean and dry micro fiber lens cleaning cloth in order to clean the touchscreen. If necessary, use a lint-free cloth dampened with a cleaning solution, such as isopropyl alcohol, or an isopropyl alcohol and water solution ratio of 50:50.
How do you turn the screen on a Jeep?
How do I clean my Jeep touch screen?
Using an alcohol-based cleaner on your device will damage the protective coating on most screens in cars. Do not wipe or clean your touch screen with paper towels or facial tissues, as these can scratch the surface. Using a microfiber cloth is the only safe way to clean your touch screen.
How do I reset my Jeep Uconnect 2015?
For a Uconnect reboot, You’ll want to hold down the Mute and Tune buttons. Now, to do a factory reset of the engineering type, You’ll hold the Temp Up and Down buttons until the engineering menu appears, and this will let You wipe everything and take it back to the factory default.
Why is my Uconnect not connecting?
Perform a hard reset in the phone by removing the battery (if removable – see your phone’s owner’s manual). Delete the pairing history in your phone and Uconnect® system, which is usually found in the phone’s Bluetooth® settings. Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your phone.
How do I reset my Uconnect 12?
- Put your vehicle into the accessories mode (ACC or RUN)
- Hold down the Phone and voice recognition buttons (or tuner and volume knob), at the same time, for thirty seconds.
- Let go of the buttons.
- Turn the vehicle off.
- Open driver’s side door for thirty seconds (or until dash illumination goes black)