Open the hood and remove the three fender mounting screws along the top edge of the fender. Remove the fender from the Jeep by pulling it out away from the body. Position a new fender in its spot and install the three mounting bolts along the top edge. Tighten the bolts with a socket and ratchet.
Subsequently, how do you take a fender off a Jeep?
Likewise, how do you remove a fender?
- Remove the front bumper cover (see separate video)
- Remove the 10mm fasteners with front door open.
- Remove top plastic fastener using flat tip screwdriver.
- Release front headlight assembly using plastic trim stick and remove electrical connector.
- Remove three 10mm fasteners along top of fender assembly.
Amazingly, how do you remove a bolt from a fender? Remove the one bolt connecting the fender to the bumper with a socket wrench and an 8 mm socket. Unbolt the single bolt inside of the fender, using a socket wrench and an 11 mm socket. Unscrew the screw holding the fender lining to the fender with a Phillips-head screwdriver. Remove the fender.
Beside above, how do you remove a Jeep fender liner?
Contents
How do you remove fender flares from a Jeep TJ?
What tools are needed to remove a fender?
- Phillips Head Screwdriver.
- Flathead Screwdriver.
- Ratchet.
- Plastic Trim Tool.
- Pliers.
- Ratchet Extensions.
How do you fix a fender?
How do you remove a front fender?
- Remove the retainers for the fender liner.
- Remove the retainers that hold the fender to the front bumper.
- Lower the front bumper.
- Open the hood and secure the hood prop in the correct location.
- Remove the antenna mask if vehicle is equipped with one.