Correspondingly, how do you reset the oil life on a 2014 Jeep Grand Cherokee? To reset the oil light to the 2014 jeep cherokee, you will turn the ignition to the on / run mode. Move the gas pedal slowly three times in 10 seconds. Change the ignition switch to the lock button. Repeat this process if the indicator appears again after the engine is started.
People ask also, how do you reset the oil change light on a Jeep Grand Cherokee?
- Turn the ignition switch to the ON position, do not start the engine.
- Fully depress the accelerator pedal slowly three times within 10 seconds.
- Turn the ignition switch to the OFF/LOCK position.
Furthermore, how do you reset the 2014 Jeep Cherokee?
Considering this, how do you reset the oil change light on a 2013 Jeep Grand Cherokee?
Synthetic oil usually should be changed every 7,500 – 10,000 miles. An oil change is one of the most necessary and necessary services for your car. Jeep recommends getting your 2014 Jeep Grand Cherokee oil & filter changed each 3,000-5,000 miles for conventional oil.Contents
How do you reset the codes on a 2014 Jeep Grand Cherokee?
To turn off the Jeep Grand Cherokee check engine light, turn the ignition switch to ON but don’t start the vehicle. Press the gas pedal 3 times within 10 seconds and turn the ignition off. Wait 10 seconds and start the engine.
How do I reset my Jeep Grand Cherokee?
- Turn the ignition switch to the “ON” position without starting the vehicle.
- Press the gas pedal to the floor slowly three times within 10 seconds.
- Turn the ignition off. Wait 10 seconds and start the engine.
How do you reset the oil life on a jeep?
Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
How often should I change my oil in my Jeep Grand Cherokee?
Jeep recommends getting your 2020 Jeep Grand Cherokee oil & filter changed every 3,000-5,000 miles, but it’s best to check your owner’s manual and with your dealer to find out the intervals that work best for your car.
How do I reset my Uconnect 2014 Jeep?
- Ensure your vehicle is in park and in “Run” mode.
- Press and hold down the volume and tuner knob buttons at the same time.
- Hold down the knobs for 10 – 20 seconds.
- After holding down the knobs, the screen should flash your vehicle brand name and then go dark.
How much oil does a 2014 Jeep Cherokee take?
Engine Oil 5.5 quarts (with filter)After refill check oil level.
Where is the cabin air filter located on a 2014 Jeep Cherokee?
Does 2014 Jeep Grand Cherokee require synthetic oil?
The engine oil type used on the 2014 Jeep Grand Cherokee is SAE 5W-20 for both itS3. 6L and 5.7L engines. You can use synthetic oil brands as long as the viscosity is the same as the regular oil You use. The capacity on Your Jeep Grand Cherokee iS6 US quarts on Your 3.6L engine.
What kind of oil does a 2014 Jeep Cherokee need?
The 2014 Jeep Cherokee 3.2L Engine requires MOPAR SAE 5W-20 engine oil or equivalent Pennzoil or Shell Helix are recommended for all operating temperatures. The 2014 Jeep Cherokee 2.4 Liter Engine oil capacity is 5.5 Quarts (5.2 Liters). The 2014 Jeep Cherokee 3.2 Liter Engine oil capacity is 6 Quarts (5.6 Liters).
What kind of oil does a 2014 Jeep Cherokee Limited take?
The 2014 Jeep Cherokee uses SAE 5W-20 motor oil in the engine. Jeep recommends that You use synthetic oil whenever You need to replace it.