Ensure your vehicle is in park and in “Run” mode. Press and hold down the volume and tuner knob buttons at the same time. Hold down the knobs for 10 – 20 seconds. After holding down the knobs, the screen should flash your vehicle brand name and then go dark.
Moreover, how do I reset my Uconnect 2020?
- Turn your key in the ignition to “Run,” but leave the car in park.
- Simultaneously press the volume button and the tuner knob at the same time.
- Continue pressing them down for 10 – 20 seconds.
Also the question is, how do you reset the Uconnect on a Jeep Cherokee?
- Press the hot and coup up and down buttons simultaneously for at least five seconds.
- Scroll through the menu that pops up and select the choice prompting you to reset factory defaults.
- Once selecting this option, wait roughly 30 seconds while the system reboots.
Also, how do I register my Jeep Uconnect 2020?
- PRESS THE UCONNECT® APPS BUTTON. The Uconnect® Apps button is on the bottom center of your touchscreen.
- ENTER EMAIL. Provide your email address to receive all the information you need to continue your registration.
- CHECK INBOX.
- CREATE AN ACCOUNT AND START YOUR TRIAL.
Furthermore, how do I reset my UConnect system?
- Use a compatible phone with Uconnect.
- Verify the Bluetooth version on your phone.
- Enable Bluetooth on your phone.
- Turn on the car stereo and enter the Bluetooth pairing code.
- Pair the mobile phone with Uconnect.
Contents
Press and hold down the volume and tuner knob buttons at the same time. Hold down the knobs for 10 – 20 seconds. After holding down the knobs, the screen should flash your vehicle brand name and then go dark.
How do you reset the computer on a Jeep Grand Cherokee?
- Disconnect the battery by removing the positive battery cable.
- Ground the positive cable to the negative cable for 30 seconds to erase the electric charge in the capacitors.
- Reconnect the positive cable to the battery.
- Turn the key to on but do not start.
- Turn the headlights on.
Why is my Jeep Uconnect not working?
It is a known issue for the bluetooth to become unpaired. Most of the time, You can resolve the problem with pairing or non-recognition by simply restarting Your gadget. Once You restarted Your gadget, wait for a while and go to bluetooth settings. Then, pair it with Your Uconnect.
Is there a free version of Uconnect?
Like a lot of features these days, the Uconnect system that is built into your vehicle is free with the cost of your car. If you want to use Uconnect Access there is a monthly subscription fee. This subscription will buy you access to a lot of features such as: 911 Calls.
How do I set up Uconnect in my Jeep Grand Cherokee?
Enable Bluetooth on your phone and select the option to search for new devices. Your phone should display “Uconnect” in the Bluetooth menu. Select “Uconnect” and enter the system’s PIN. Uconnect should announce “pairing complete.” Your phone is now paired.
How do I activate Uconnect?
- Press the Assist button on your rearview mirror.
- Press the activate button on the Touchscreen, followed by the Customer Care Button.
- Speak with an agent who will get you started.
- From inside your vehicle, push the Assist button on your rearview mirror.
How do I reconnect my Uconnect?
Why is my Uconnect not connecting?
Perform a hard reset in the phone by removing the battery (if removable – see your phone’s owner’s manual). Delete the pairing history in your phone and Uconnect® system, which is usually found in the phone’s Bluetooth® settings. Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your phone.
How do I know my Uconnect version?
Registered. Found it. On your touch screen, touch Apps, Settings, System info.
How do I fix my Uconnect app?
First, confirm that your SXM Guardian or Uconnect Access subscription has not expired. Then, visit the app store for your phone and ensure that you have the most up-to-date app version downloaded; you may even want to delete and re-download the app as a precaution.