- Turn your key in the ignition to “Run,” but leave the car in park.
- Simultaneously press the volume button and the tuner knob at the same time.
- Continue pressing them down for 10 – 20 seconds.
People ask also, how do you reset the Uconnect on a Jeep Cherokee?
- Ensure your vehicle is in park and in “Run” mode.
- Press and hold down the volume and tuner knob buttons at the same time.
- Hold down the knobs for 10 – 20 seconds.
- After holding down the knobs, the screen should flash your vehicle brand name and then go dark.
You asked, how do I reset my Uconnect Jeep?
- Press the hot and coup up and down buttons simultaneously for at least five seconds.
- Scroll through the menu that pops up and select the choice prompting you to reset factory defaults.
- Once selecting this option, wait roughly 30 seconds while the system reboots.
Moreover, how do I soft reset my Jeep? The first is what is called a soft reset. Push and hold the volume and two knobs at the same time for about 10 to 20 seconds until the radio power is off. Once the system shut off it will quickly turn back on and take about a minute or so to fully come back online.
Furthermore, how do I reset my Jeep touch screen? To do a soft reboot of Your touch screen in Your 2018 Jeep Grand Cherokee You’ll need to hold down the enter and volume buttons for 15 to 25 seconds. After this time has passed the screen will flash and then it should come back on and work like normal.
- Turn your key in the ignition to “Run,” but leave the car in park.
- Simultaneously press the volume button and the tuner knob at the same time.
- Continue pressing them down for 10 – 20 seconds.
Contents
Why is my Jeep Uconnect not working?
It is a known issue for the bluetooth to become unpaired. Most of the time, You can resolve the problem with pairing or non-recognition by simply restarting Your gadget. Once You restarted Your gadget, wait for a while and go to bluetooth settings. Then, pair it with Your Uconnect.
What to do if Uconnect is not working?
- Use a compatible phone with Uconnect.
- Verify the Bluetooth version on your phone.
- Enable Bluetooth on your phone.
- Turn on the car stereo and enter the Bluetooth pairing code.
- Pair the mobile phone with Uconnect.
How do I reset my Uconnect charger?
Why is my Jeep screen black?
An all black screen usually indicates a failure of wiring. The touch screen / head unit isn’t getting power, so it’s unable to display. A blue screen indicates a software failure — there’s not much You can do without having a dealership reflash the manufacturer’s software.
How do I reset my jeep radio?
- Hold down hot and cold buttons until the menu comes up.
- Select rest radio.
- The select reset factory default.
- Your UConnect will reset to the factory default.
How do I reset my Jeep Grand Cherokee?
- Turn the ignition switch to the “ON” position without starting the vehicle.
- Press the gas pedal to the floor slowly three times within 10 seconds.
- Turn the ignition off. Wait 10 seconds and start the engine.
How do I get the code for my Jeep Cherokee radio?
To find the serial number required to unlock the Jeep Cherokee radio or Sat nav, you will need to remove the radio from the dashboard using a set of Jeep Radio Release Keys. Once you have removed the radio, you will be able to locate the unique serial number.
How do I reset Uconnect?
Why is my Jeep Cherokee radio not working?
Push and hold the volume and two knobs at the same time for about 10 to 20 seconds until the radio power is off. Once the system shut off it will quickly turn back on and take about a minute or so to fully come back online. After pressing yes You will have to wait 30 seconds and then there’s some will begin to reset.
How do you reset the screen on a 2019 Jeep Cherokee?
Press the Voice Command and both Phone buttons (all 3 buttons) (the ones on the steering wheel) press all 3 for 30 seconds, then release. Open driver door, leave open for 30 seconds, then close the door. I have never done this but it is supposed to reset Uconnect. Just tried that.