Locate the yellow plastic electrical connector and unplug the connector by hand. Find the green plastic electrical connector next to the yellow connector and unplug it by hand in order to disable the Jeep Grand Cherokee airbag.
Also the question is, how do you reset the airbag light on a Jeep?
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
You asked, why is my jeep airbag light on? If the airbag warning light illuminates, it could indicate that the sensor has failed and that the airbags might not work properly in a crash. Even if the warning light isn’t illuminated, owners should verify whether their vehicle is affected by this recall.
Amazingly, can you disable an airbag light? Luckily, you can reset and turn off your airbag light. You can also recheck the connectors in case the light fails to turn off. Turning off the airbag light yourself can save you a trip to your car dealer.
Also know, will disconnecting battery reset airbag light? Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. … Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.
How do you trick an airbag light?
Is it okay to drive with the airbag light on?
If the airbag light is on, it means that the airbag will not be able to deploy in the event of an accident. This is a dangerous proposition, and it means that you should avoid driving if at all possible in that vehicle.
How much does it cost to reset the airbag light?
Number 1 — Reset Airbag Light You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
What does it mean when the airbag light stays on?
The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.
How do I know if my airbag sensor is bad?
Symptoms of a failing airbag sensor You can easily tell if the sensor is functioning if the airbag warning light on the dashboard is illuminating every time you start the vehicle. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.
Will removing fuse disable airbag?
The NHTSA says that you can’t remove or disable the airbags on any registered, road-driven vehicle newer than 1996 without a waiver. … Simply pulling the airbag fuse may not disable the airbags. Many ACMs utilize an internal battery to ensure deployment even if the power is cut.
Can a blown fuse cause the airbag light to come on?
Blown fuses can definitely cause the airbag light to come on. When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.
What does the airbag light look like?
the srs warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person. it will normally light up briefly each time you start your vehicle, and then go off.
How do I turn off the airbag light after an accident?
Can you clear airbag codes?
No, scanners cannot clear these codes. These codes are stored after a vehicle accident and are also known as crash data. Also, these codes are hardware issue codes. Hard Codes require professional reset services like us.