Pushing the volume control knob under the screen is an on/off switch.
Also know, how do you turn off the radio in a 2018 Jeep Grand Cherokee? Push and hold the volume and two knobs at the same time for about 10 to 20 seconds until the radio power is off. Once the system shut off it will quickly turn back on and take about a minute or so to fully come back online.
Correspondingly, how do you turn off the 2017 Jeep Grand Cherokee?
Considering this, how do I turn on the radio in my Jeep Cherokee? For some jeep grand cherokee models you can: press the start button twice without pressing the brake pedal, this will put your vehicle in intermediate operation before starting the engine to turn on the radio again.
Similarly, how do I turn off the radio in my Jeep? Well-Known Member Can’t you just push the power button (left side of photo with the standard “power” icon)? If that turns off everything, just hit the “mute” button which is just below that to silence the radio.
Contents
On the nav screen there are the three little lines (hamburger) in the bottom right corner. There a selection there to Mute Guidance. That turns voice guidance off and on.
How do I reset my Uconnect radio?
- Turn your key in the ignition to “Run,” but leave the car in park.
- Simultaneously press the volume button and the tuner knob at the same time.
- Continue pressing them down for 10 – 20 seconds.
Why is my radio not working in my Jeep Grand Cherokee?
You could try removing power from radio for 90 seconds or so, so it will hard reboot. If that does not work, you could try to create a flash drive on the uconnect site and update the software. To power down radio, you need to pull the fuse that directly supplies battery feed to the radio at all times.
How do I reset my jeep radio?
Ensure your vehicle is in park and in “Run” mode. Press and hold down the volume and tuner knob buttons at the same time. Hold down the knobs for 10 – 20 seconds. After holding down the knobs, the screen should flash your vehicle brand name and then go dark.
How do you adjust the headlights on a 2017 Jeep Grand Cherokee?
How do you change a headlight on a 2017 Jeep Grand Cherokee?
How do you turn the lights off in a jeep?
How do you turn the screen on a Jeep?
How do I reset my Jeep Cherokee screen?
To do a soft reboot of Your touch screen in Your 2018 Jeep Grand Cherokee You’ll need to hold down the enter and volume buttons for 15 to 25 seconds. After this time has passed the screen will flash and then it should come back on and work like normal.
Why is my Jeep screen black?
An all black screen usually indicates a failure of wiring. The touch screen / head unit isn’t getting power, so it’s unable to display. A blue screen indicates a software failure — there’s not much You can do without having a dealership reflash the manufacturer’s software.