Likewise, how do you reset the oil change light on a 2012 Jeep Grand Cherokee?
Subsequently, how do you reset the oil change message on a Jeep Grand Cherokee?
- Turn the ignition switch to the ON position, do not start the engine.
- Fully depress the accelerator pedal slowly three times within 10 seconds.
- Turn the ignition switch to the OFF/LOCK position.
Additionally, how do you reset the oil life on a 2011 Jeep Grand Cherokee?
- Put the key in and turn it to the second position or to the RUN position.
- Depress the GAS PEDAL three times.
- Turn the ignition off and start the engine to verify the indicator has been reset.
Moreover, how do you reset the oil life on a 2013 Jeep Grand Cherokee?
Contents
How do you reset the computer on a Jeep Grand Cherokee?
- Disconnect the battery by removing the positive battery cable.
- Ground the positive cable to the negative cable for 30 seconds to erase the electric charge in the capacitors.
- Reconnect the positive cable to the battery.
- Turn the key to on but do not start.
- Turn the headlights on.
How do you reset the oil life on a jeep?
Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
How do you reset the oil life on a 2017 Jeep Grand Cherokee?
How do I reset my oil life?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
What kind of oil does a 2011 Jeep Grand Cherokee take?
Jeep Grand Cherokee Laredo / Limited / Overland 5.7L 2011, SAE 5W-20 Full Synthetic Motor Oil, by Mobil 1®.
What type of oil does a 2012 Jeep Grand Cherokee take?
Jeep Grand Cherokee 3.6L 2012, SAE 5W-30 Full Synthetic Motor Oil, 1 Quart by Idemitsu®. Developed for high-capacity engines, including turbos.
How do you reset the oil life on a 2016 Jeep Grand Cherokee?
How do you reset the service indicator on a Jeep Grand Cherokee 4wd?
- Turn the ignition switch to the “ON” position without starting the vehicle.
- Press the gas pedal to the floor slowly three times within 10 seconds.
- Turn the ignition off. Wait 10 seconds and start the engine.
How do you reset the computer on a 2018 Jeep Grand Cherokee?
To do a soft reboot of Your touch screen in Your 2018 Jeep Grand Cherokee You’ll need to hold down the enter and volume buttons for 15 to 25 seconds. After this time has passed the screen will flash and then it should come back on and work like normal.
How long does battery need to be disconnected to reset ECU?
Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.