Amazingly, how do you reset the oil life on a 2014 Jeep Grand Cherokee? To reset the oil light to the 2014 jeep cherokee, you will turn the ignition to the on / run mode. Move the gas pedal slowly three times in 10 seconds. Change the ignition switch to the lock button. Repeat this process if the indicator appears again after the engine is started.
Beside above, how do you reset the oil gauge on a Jeep Grand Cherokee?
- Turn the ignition switch to the ON position, do not start the engine.
- Fully depress the accelerator pedal slowly three times within 10 seconds.
- Turn the ignition switch to the OFF/LOCK position.
Also the question is, how do you reset the oil light on a 2015 Jeep Grand Cherokee?
Quick Answer, how do you reset the oil life on a Jeep Cherokee?
- Shift the gear to the “Park/P” position.
- Without holding the brake pedal, press the Start/Stop button to turn on the electronics.
- On the steering wheel, navigate to the “Oil Life” selection under “Vehicle Info“.
- Push and hold the OK button until the oil light percentage changes to 100%.
Synthetic oil usually should be changed every 7,500 – 10,000 miles. An oil change is one of the most necessary and necessary services for your car. Jeep recommends getting your 2014 Jeep Grand Cherokee oil & filter changed each 3,000-5,000 miles for conventional oil.
Contents
How do you reset the codes on a 2014 Jeep Grand Cherokee?
To turn off the Jeep Grand Cherokee check engine light, turn the ignition switch to ON but don’t start the vehicle. Press the gas pedal 3 times within 10 seconds and turn the ignition off. Wait 10 seconds and start the engine.
How much oil does a 2014 Jeep Grand Cherokee take?
Engine Oil 5.9 quarts (with filter)After refill check oil level.
How do I reset my oil life?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How much oil does a 2020 Grand Cherokee hold?
Capacity: 7 quarts (with filter)After refill check oil level.
How do you reset the oil light on a 2013 Jeep Grand Cherokee?
How do you reset the oil light on a 2016 Jeep Grand Cherokee?
What kind of oil does a Jeep Cherokee 2014 take?
The 2014 Jeep Cherokee uses SAE 5W-20 motor oil in the engine. Jeep recommends that You use synthetic oil whenever You need to replace it.
How do you reset the oil life on a Jeep Compass?
How often do you change the oil in a Jeep Cherokee?
Jeep recommends getting your 2020 Jeep Cherokee oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed every 7,500 – 10,000 miles. An oil change is one of the most parmount and essential services for your car.
Does 2014 Jeep Grand Cherokee require synthetic oil?
The engine oil type used on the 2014 Jeep Grand Cherokee is SAE 5W-20 for both itS3. 6L and 5.7L engines. You can use synthetic oil brands as long as the viscosity is the same as the regular oil You use. The capacity on Your Jeep Grand Cherokee iS6 US quarts on Your 3.6L engine.