To break down the costs, you can expect a gear overhaul kit to cost anywhere from $600 to $1,200. On top of that, you will have to pay $500+ for labor and any other parts you decide to change with it. The more you change, the quicker your cost will add up to $2,000 to $3,000.
Considering this, where is the gear ratio on a Jeep Wrangler?
As many you asked, what is the best gear ratio for Jeep Wrangler? 3.73 tends to be the sweet spot between MPG and off road performance. But that totally depends on what size tires you put on. If you go real big you need to get 4.10 or greater.
Similarly, how do you change gears on a Jeep Wrangler?
Furthermore, why do Jeep have two sticks? Jeeps were designed to have low and high gears for crawling up steep hills and powering down steep hills, respectively. The engine and transmission are designed so that the transmission would need to shift more often than with a single-speed transmission, so the two shifters minimize gear changes.
Contents
Can you tell gear ratio from Vin?
While it may be possible to derive information about an auto’s gearbox ratio from its VIN, that depends largely on the information the manufacturer includes in the vehicle descriptor section (VDS) of the VIN.
How do I know what gear ratio my Jeep JK is?
What gear ratio do I need for 35 inch tires Jeep Wrangler?
In most applications, with normal driving habits, you’ll usually want to back up the 35-inch tires with 4.88 gears.
What gear ratio do I need for 33 inch tires on Jeep Wrangler?
I agree with most here that 33’s and 4.10’s are a very good combination with the 6-speed both on and off road. I can maintain Highway speed easily in the 6th and 1st gear is low enough to give a decent crawl speed when off-roading.
Are 4.88 gears good?
4.88 are great… but you’ll be reving it out on the freeway just to stay at speed. 4.56 are more “well rounded.”
Can I put my Jeep in 4WD while driving?
How do I get my Jeep out of 4 low?
- slow your vehicle down to 2-3 mph. With your Jeep still rolling,
- shift into neutral and slowly.
- firmly pull the lever all the way back.
- Put your Jeep back into gear and you’re good to go.
How do I put my Jeep in 4 low?
The Jeep Wrangler and Jeep Gladiator have the 2 Wheel Drive Part-time System. To put them into 4 Wheel Drive High you need to be drive around 7 – 30mph and pull down the lever from 2H to 4H. If you need to put them into 4 Wheel Drive Low you need to be Parked and then shift into Neutral.
Can 3.73 gears handle 35s?
You can do it but it’s definitely not ideal. The ratios with a 5.13 first on a 3.73 rear end and 35’s (your proposed setup) is very slightly taller than what a stock 6MT Tacoma is in first gear so it’s not like you’re going to be causing massive wear getting started.
What gear ratio is best for 33 inch tires?
While 4.56 is ideal for 33″ tires and 5-speed transmission, the 3-speed auto’s lack of an Overdrive makes 4.10 the best all-around street and offroad ratio for your TJ. The only time you’d want 4.56 with 33″ tires and 3-speed automatic is if your engine was the 2.5L four-banger.