Gather the Needed Supplies. Per Owner’s Manual the 3.6L Pentastar engine in the 2013 JK takes 6 quarts of 5W-20 motor oil. Experience put the fill at just a little under this (about 5.6 quarts).
Likewise, what is the best oil for 2013 Jeep Wrangler? The SAE 5W-20 engine oil is recommended for all operating temperatures for the 2013 Jeep Wrangler. This engine oil improves low temperature starting and vehicle fuel economy.
Also know, how much oil do I put in my Jeep Wrangler? Most engines require anywhere between 5 to 8 quarts of oil. For example, a 4-cylinder engine will require at least 5 quarts of oil and a 6-cylinder engine will require around 6 quarts of motor oil.
People ask also, can I put 5w30 instead of 5w20? Can You Use 5W-30 Instead of 5W-20? In theory, yes, you can switch from using 5W-20 to the 5W-30 because they have similar viscosity ratings. In fact, often, when you take your car to a mechanic for an oil change, they’ll put the 30 instead of the 20 because it’s thicker.
Also, do jeeps take synthetic oil? Does Jeep Use Synthetic Oil From The Factory? This is regular oil and the exact same oil found in your engine when you purchased it from the dealership. If you were to have your Jeep serviced at the dealership they would use this oil. The factory service manual recommends an oil change every 3000 miles.
Contents
What oil does a 3.6 Pentastar take?
What Oil Does A 3.6 Pentastar Take? The 3.6 Pentastar needs a 5W-20 oil for proper functioning. The quantity must be six quarts so the engine can work efficiently.
Do Jeep Wranglers burn oil?
Why is your Jeep Wrangler Burning Oil? In a nutshell, most likely, your Jeep is burning oil because there is a leak somewhere in the engine. There are two reasons for these leaks that are the most common and result in the burning of oil in your engine: Oil Leaking Through Damaged Piston Rings.
What oil do Jeeps use?
Pennzoil® is the only motor oil recommended by the Jeep® brand in North America.
Can you put 5w30 in a Jeep Wrangler?
Registered. 5W30 is fine to use.. It says so in the manual.
Can you mix synthetic oil with regular oil?
yes. If you don’t have a choice, adding synthetic oil to regular oil can help you out in a pinch. … Since motor oils are generally made from the same ingredients (base oil and additives), they are typically compatible when mixed.
Where does oil go in Jeep?
Place the oil drain pan underneath the vehicle. Locate the oil drain plug. It is located at the bottom of the vehicle (indicated by the red square in the image). The pan will need to be directly underneath the oil drain plug in order to catch all of the old oil.
What’s the difference between 5w30 and 5w20?
When comparing 5w20 vs. 5w30 motor oil, the 20 indicates that the oil has a lower viscosity and is thinner at higher temperatures. … So, due to viscosity, 5w20 is a thinner oil during operating temperatures, whereas 5w30 is thicker during operating temperatures.
What happens if you mix 5w30 and 5w20?
You can’t mix between regular/synthetic blend/full synthetic but mixing weights, especially if they’re by the same manufacturer, is no problem.
Will 5w30 hurt a 0w20 engine?
These days every motor oil is multigrade motor oil. But among them, 0w20 and 5w30 are famous due to their top-notch performances. If you add 5w30 to your vehicle instead of 0w20, the performance of your vehicle will not affect much. Your vehicle will continue to run smoothly and providing you comfortable rides.
Can you put 10w30 in a 5w20 engine?
Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.