- With the ignition off, buckle your seatbelt.
- Turn your ignition to the “ON” position.
- Wait until the “Fasten Seatbelt” reminder light goes out.
- Unbuckle and rebuckle your seatbelt a MINIMUM of 3 times, ending with the seatbelt buckled.
- Turn ignition to “OFF”.
Also know, how do you turn off the seatbelt chime on a 2013 Jeep Wrangler?
Likewise, how do you turn off the seatbelt chime on a Jeep Wrangler? Put your keys in the ingnition, but don’t turn the key yet. Buckle your seat belt and start the engine. Once it is running, you have 60 seconds to unbuckle the belt 3 times. Once you have it should be off.
People ask also, how do you turn off the seatbelt chime on a 2014 Jeep Wrangler? turn the ignition switch to the OFF position, and buckle your seat belt while sitting in the drivers seat. 2. turn the ignition key to the ACCESSORY/RUN position (engine does not need to be running), and wait for the seat belt warning light to turn off.
Also, how do you turn off the seatbelt chime on a 2012 Jeep Wrangler? Turn the ignition key to the ACCESSORY/RUN position (engine does not need to be running), and wait for the Seat Belt Warning Light to turn off. 3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat belt buckled.
- Get in the Jeep (Drivers seat).
- Close doors and buckle seat belt.
- WITHOUT stepping on the brake pedal, push the start button twice to Run Mode (do not start the engine).
- Wait for seat belt light to turn off.
- Unbuckle and rebuckle seat belt three (3) times ending with seatbelt buckled.
Contents
How do you turn off the seatbelt on a Jeep?
- Sit in your Liberty. Close the door behind you. Place your key into the ignition, but to not turn it.
- Buckle your seatbelt. Turn the key two clicks to the right.
- Watch your instrument cluster. There is a small light in the corner.
- Unbuckle the seatbelt. Buckle the seatbelt.
How do I stop my seat belt from dinging?
Can you turn off seatbelt alarm?
You should turn the key off, and then back on. Hold the same knob for 10-15 seconds. While still holding the knob, put on your seatbelt, and then release the knob. … This indicates that you turned off your seat belt alarm.
How do you turn off the seatbelt chime on a 2017 Jeep Cherokee?
- Get in vehicle and put seat belt on.
- Turn vehicle on. (Does not need to be started.
- Once the Jeep is on, the diagnostic screen will briefly show the seat belt warning indicator. As soon as the indicator goes away, quickly disconnect then reconnect the seat belt at least three times.
- Turn off Jeep.
How do you turn off the seatbelt chime on a 2014 Jeep Grand Cherokee?
Switch the ignition to the RUN position (but don’t start the engine). 3. Within 60 seconds of switching the ignition to RUN, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat belt buckled. 4.
How do you turn off the seatbelt chime on a 2013 Jeep Grand Cherokee?
fasten your seat belt. turn the key on, (or push button to ACC mode) watch the seatbelt light. when it goes off, unbuckle rebuckle the seatbelt 3 times within 10 seconds, and immediately turn the key off (push button to off) it will chime once to tell you if this was done successfully.
How do you fix a seatbelt alarm?
How do you turn off the seatbelt chime on a 2006 Jeep Commander?
Put your keys in the ingnition, but don’t turn the key yet. Buckle your seat belt and start the engine. Once it is running, you have 60 seconds to unbuckle the belt 3 times. Once you have it should be off.
How do you turn off the seatbelt chime on a 2018 Jeep Renegade?
- Turn the ignition switch to the OFF position, and buckle the driver’s seat belt. 2. Turn the ignition key to the ACCESSORY/RUN position (engine does not need to be running), and wait for the Seat Belt Warning Light to turn off.
How do you turn off the seatbelt chime on a 2006 Jeep Grand Cherokee?
- Turn ignition to the OFF position and buckles the driver’s seat belt.
- Turn the ignition key to the ACC/ON position (engine does not need to be running), and wait for the seat Belt Warning Light to turn off.