Best answer for this question, how do you remove the rear bumper on a 2020 Jeep Wrangler?
As many you asked, how do you take a bumper off a Jeep?
People ask also, how do you put a rear bumper on a Jeep Wrangler?
Frequent question, how do you take the bumper off a 2019 Jeep Wrangler?
Important: While the front Jeep Wrangler JK bumper will bolt right onto the Jeep Wrangler JL, the rear frame is completely different. For example, front bumpers do work, but to say ALL aftermarket front bumpers will bolt right up is a complete unknown.Contents
How do you remove a bumper from a jeep JL?
- Remove the two plastic clips that hold on the top plastic bumper cover.
- Unplug the front bumper harness located along the passenger side frame rail.
- Use a 13mm Socket to remove both lower skid plate bolts. (
- Using an 18mm Socket, remove the bumper mounting bolts (4 per side).
How do you change a bumper on a Jeep Wrangler?
- Step 1 – Remove plastic shield. Remove the six rubber grommet holding the front plastic shield under the front of your Jeep.
- Step 2 – Disconnect fog lights. To disconnect the fog lights, you will need to unplug the electrical harness connected to it.
- Step 3 – Remove bumper bolts.
- Step 4 – Remove bumper.