- Disconnect and isolate the negative battery cable.
- Remove the engine cover.
- Remove the air cleaner body.
- Drain the cooling system.
- Remove the upper radiator hose from the thermostat housing (1).
- Remove bolts and thermostat housing (1) with thermostat (3).
- Remove and discard the thermostat housing gasket.
Amazingly, how do you change a thermostat on a 2017 Jeep Wrangler?
People ask also, is it easy to replace a coolant thermostat? If the thermostat sticks in the closed position, the liquid isn’t allowed to get to the radiator, and overheating results. Because replacing the thermostat is quite simple and thermostats are quite inexpensive, you may want to try this task before you take more drastic measures.
Additionally, how do you change a thermostat on a 2014 Jeep Wrangler?
Similarly, how much is a thermostat for a Jeep? Jeep Wrangler Thermostat Replacement Cost Estimate. Labor costs are estimated between $68 and $86 while parts are priced at $57.
Contents
How do you know a thermostat is bad?
HVAC system won’t turn on: The most obvious sign of a bad thermostat is that the HVAC system in your building won’t turn on or respond to the thermostat. You should be able to turn on your heating or cooling system from the thermostat, or change operation back and forth from heating to cooling.
How many thermostats does a jeep have?
Your engine is equipped with (2) Thermostats. When the Engine is cold and both the primary and secondary thermostats are closed. The coolant will circulate through the engine, heater system, and the bypass. The cooling system has no flow through the radiator.
What type of coolant does a Jeep Wrangler take?
your Jeep requires HOAT antifreeze – like Zerex GO5. Zerex GO5 is available at NAPA. The color of antifreeze means nothing regarding it’s type/composition.
Why is my Jeep Wrangler overheating?
While there are a variety of reasons your Jeep Wrangler is overheating, the most common 3 are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat.
How much does it cost to replace coolant thermostat?
You will pay between $150 and $200 to have your thermostat replaced. The labor should be around $125, while parts should cost you, on average, about $45.
Is it hard to change a thermostat?
But after a bit of research, I discovered that replacing a thermostat is pretty stinking easy. … Granted, each heating and air conditioning system will have unique requirements for connecting a new thermostat, but the general process is pretty much the same.
Can you replace a car thermostat yourself?
Replacing a car’s thermostat (or T-stat) is an easy and inexpensive repair. In most cases it will cure an overheating or no-heat problem, sparing the time and expense needed for expert diagnostics.
Where is the temperature sensor on a 2014 Jeep Wrangler?
The 2014 Jeep Wrangler coolant temperature sensor is found in the coolant pipe located below the air intake pipe. It constantly monitors the engine coolant temperature information to the engine control unit and the temperature gauge.
How do you change a thermostat on a 2008 Jeep Wrangler?
What is a coolant temp sensor?
A coolant temperature sensor (CTS) (also known as an ECT sensor or ECTS (engine coolant temperature sensor) is used to measure the temperature of the coolant/antifreeze mix in the cooling system, giving an indication of how much heat the engine is giving off.