Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
Quick Answer, how do you reset the oil light on a 2015 Jeep Wrangler?
Considering this, how do you reset the oil change light on a 2013 Jeep Wrangler?
Correspondingly, how do you reset the oil life on a 2014 Jeep Wrangler?
- Turn the key to ON/RUN position with engine off.
- Fully depress and release the accelerator pedal 3 times within 10 seconds.
- Turn the key to the OFF position and then back on to confirm reset was accepted.
You asked, how do you reset the oil light on a Jeep? Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
Contents
How do I reset my oil light?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the change oil light on a 2011 Jeep Wrangler?
Why is my change oil light on when I just changed my oil?
The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.
How do I reset my Jeep Cherokee?
Disconnect the battery by removing the positive battery cable. Ground the positive cable to the negative cable for 30 seconds to erase the electric charge in the capacitors. Reconnect the positive cable to the battery. Turn the key to on but do not start.
How do I reset my oil change light on my Jeep Grand Cherokee?
- Turn the ignition switch to the ON position, do not start the engine.
- Fully depress the accelerator pedal slowly three times within 10 seconds.
- Turn the ignition switch to the OFF/LOCK position.
How do you reset the oil light on a Jeep Cherokee?
On the steering wheel, navigate to the “Oil Life” selection under “Vehicle Info“. Push and hold the OK button until the oil light percentage changes to 100%. Press the Start/Stop button to turn the electronics off.
Why won’t my oil light go off?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.
How do I fix my oil pressure light?
What does change oil light look like?
Indicator Light | Engine Oil Level Engine Oil Level Indicator– This dashboard warning light looks like a lamp with a drop of oil dripping from it. … Two, your vehicle is long overdue for an oil change. If this light illuminates, check your oil levels.
Why is my oil light on but my oil is full?
When the oil light on your dashboard comes on, it might mean your vehicle has low oil pressure. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.