Quick Answer : how to program key 2009 jeep wrangler?

1. Insert First Programmed Key. INSERT a working remote head key into the Ignition and TURN it to the ON/RUN position.
2. Remove First Programmed Key.
3. Insert Second Programmed Key.
4. Remove Second Programmed Key.
5. Program Remote.
6. Program Additional Remote.
7. Exit Programming Mode.
8. Test Remotes.

Moreover, how do I program my Jeep Wrangler key?

Similarly, how do I program my Jeep key with only one key?

Amazingly, how do I reprogram my own key?

1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
2. STEP 2-Press the lock button.
3. STEP 3-Turn off the ignition.
4. STEP 4-Repeat the process with other key fobs.
5. STEP 5-Restart the process.

Subsequently, how do you program a key fob without original?

1. Replace the batteries inside the key fobs.
2. Get inside the car.
3. Turn on the ignition.
4. Press the lock button on the remote key.
5. Listen for a Lock Sound.
6. Programming additional remotes.
7. Turn off the ignition.
8. Step out from your car and test the result.

1. First, call an automotive locksmith that offers a mobile service for Jeep cars. We can help you with that.
2. Second, tow the car to the dealer.
3. Third, order a key online and have the dealer or locksmith cut and program (if necessary) it for you.

How do you bypass a transponder key?

How do you program a car key with only one key?

How much does it cost to have a key fob programmed?

Programming a replacement key fob can run anywhere from $50 to $100. Some dealerships may do this for free or charge a small fee. If you’ve lost your key fob, but you have the metal key, you can even get into your car and start it.

How do I find my Jeep key code?

Turn the key in the following pattern: On-Off-On-Off-On. Grab a pen and paper and count the number times the check engine light flashes at you. It will be a code.

Can you program a Ford key yourself?

First you will need both of the programmed keys that came with the vehicle. If you do not have both, you will not be able to program the key yourself. You will need to go to the dealer to have it done. If you have both keys, put one of the already programmed keys into the ignition.

How do you know if your key needs to be reprogrammed?

Like anything, these keys can become damaged in many ways, water damage and physical damage being the most common, but when your car’s on-board computer fails to recognise your key’s unique code, you will need to have it reprogrammed.

Can you program any key fob to any car?

Hi there. You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle. … Remove the battery cables from the vehicle, wait 30 seconds, then hook them back up (reset computer). Put the key in the ignition and turn the key to the ‘ON’ position.

How do I reprogram my Ford key fob?

1. Shut the car doors, then open the driver-side door. Press the UNLOCK button the driver-side door.
2. Now, turn the ignition from OFF to RUN 8 times.
3. Press any button on the Ford remote to program it.
4. Have more than one key fob?
5. Lastly, turn the ignition OFF.

How do I reprogram my key fob after replacing my battery?

1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
2. STEP 2-Press the lock button.
3. STEP 3-Turn off the ignition.
4. STEP 4-Repeat the process with other key fobs.
5. STEP 5-Restart the process.

How do you program a charger key fob?

After inserting the key into the ignition, turn it to the “RUN” position while pressing and holding down the “UNLOCK” button on the driver’s door. Simultaneously hold down the “UNLOCK” button and the “PANIC” button, then release them at the same time.