Jeep Wrangler

Quick Answer : how to put new soft top on jeep wrangler?

  1. Pull the soft top back up towards the front of the Wrangler.
  2. Pull down the Rear Sail Flaps and secure them into the rear window retainers.
  3. Line up the rear window with the Swing Gate Bar Brackets and push them into place by pushing in and rotating.

In this regard, how do you put a Jeep soft top back on? How do I put the soft top back up? Step 1: Slide the lever to the unlock position on each side of the soft top. Step 2: At the rear of the Jeep, grab the soft top material and push it upward onto the top of the Wrangler to allow it to slide along the guide track and lock.

Also, how long does it take to install a soft top on a Jeep Wrangler? A: In most cases with just a basic set of tools and average mechanical aptitude, anyone can install a soft top. Depending on which Jeep top you buy, installation can take from 1 hour to 3 or 4.

Beside above, how do you put a soft top on a Jeep Wrangler 2020?

Can you completely remove Jeep soft top?

To remove the quarter windows, lift up the Velcro on the top and rear side of both back windows. Open the rear door, and undo the zipper. Remove the retainer rails. Now you can fully remove the top.

How do you secure a Jeep soft top when down?

How do you take a Jeep hardtop off by yourself?

Do Jeep Wranglers come with both hard and soft tops?

Wrangler comes standard with a soft top. If you pay for a hard top (will see hard top under options on window sticker), you will get only a hard top and delete the soft top. This sounds like your situation. IF you pay for the dual top option, then you get both.

How heavy is a Jeep hard top?

Jeep hardtops can weigh anywhere from 80 to 140 pounds and will change depending on the various Jeep Wrangler models that are out there. In general, you could estimate an average weight of 100 pounds for a hardtop but it all depends on the model of Jeep you have.

How do you open the roof of a Jeep Wrangler?

Lift up on the header latch above the windshield frame to free the Freedom Panel from the roof. Push up and remove it from the Wrangler. Store it somewhere safe. Step 3: On the passenger’s side, unscrew the Rear Fastener Knob, turn the single L-shaped lock all the way to open.

How do you take the hard top off a Jeep Wrangler 2020?

How do I secure my Sunrider soft top?

To secure the top wrap the SunriderĀ® Straps around the Side Bows and through the Body Side Retainer Slot and Velcro back onto itself.

See also:   How many gallons does a 2015 jeep wrangler hold?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!