To reset the oil life on the 2017 jeep wrangler, turn the key to on, press on the accelerator slowly 3 times in a span of 10 seconds, then turn ignition to off.
Subsequently, how do you reset the oil life on a Jeep Wrangler? Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
People ask also, how do you reset the oil change light on a 2017 Jeep Wrangler?
Likewise, how do you reset the oil life on a 2017?
Quick Answer, how often do Jeep Wranglers need oil change? The Wrangler’s Owner’s Manual recommends changing the oil and filter when the Oil Change Indicator System alerts you to do so, but recommends intervals not exceed 12 months or 10,000 miles, whichever comes first.
Contents
Why does my Jeep says oil change required?
The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. … Unless reset, this message will continue to display each time you turn the ignition switch to the ON position.
How far can you drive with 5 oil life?
Hi There, Your oil life percentage is generally an estimated time designed to prompt the operator of the vehicle to have the oil changed as soon as possible. 5% is generally not something to be concerned about, but you should consider having the oil changed in the next 1,000 miles or less.
At what oil life percentage should you change your oil?
With fresh engine oil, your percentage is 100%. It drops over time as you put miles on your Honda. So at 40%, your oil still has 40% of its lifetime remaining to do its job before it needs to be replaced.
How far can you go on 10 oil life?
With your current mileage, 10% is roughly 900 miles so you can go on your trip without any concern. If you get to 0% on the maintenance minder, the light will blink and not go out.
Do jeeps require synthetic oil?
How often does a 2020 Jeep Wrangler need an Oil Change? Synthetic oil usually should be changed every 7,500 – 10,000 miles. Jeep recommends getting your 2020 Jeep Wrangler oil & filter changed every 3,000-5,000 miles for conventional oil.
How long can a Jeep go without an oil change?
Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.
How many miles does a Jeep engine last?
A Wrangler can typically reach 280,000 miles before significant problems begin to surface. But well-maintained models exceed 20 years and over 400,000 miles. The Wrangler is built for the outdoors and designed to tackle tough terrain, contributing to its longevity.
Why is my change oil light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. … The next common cause is low oil pressure.
Why is my engine light on after oil change?
These lights can signal something serious or something as simple as a loose gas cap. … Oil changes are essential maintenance for your car but it won’t do anything that could trigger your check engine light to come on. If you notice the light after an oil change, something else is wrong.