How To Change A Tire On A Land Rover Lr4?

Place a wheel wedge or heavy rock by tires to prevent your car from rolling.
Loosen the lug nuts.
Jack up your SUV.
Remove the lug nuts.
Remove the flat tire and replace with your spare.
Replace the lug nuts and hand-tighten.

Furthermore, how do you jack up a Land Rover? Turn the jack lever (2) clockwise to raise the jack, until it locates into the jacking point. Make sure that the base of the jack is in full contact with the road surface. Raise the vehicle with the jack, until the tyre being lifted just clears the ground. Operate the jack with a slow and steady motion.

Likewise, where is the spare tire in an lr4? The temporary spare wheel is located underneath the rear of the vehicle. The winch to lower the temporary spare wheel is located in the bottom of the tool tray.

Also know, how do you take a tire off a Range Rover?

Another frequent question is, where is the jack in a Discovery 4? In the engine bay – left hand side, is where the jack is. The other tools are supposed to be in the bag in the back door.

Contents

How do I remove the spare tire from a Discovery 4?

How do you lift a Land Rover with air suspension?

Up button: Press and release to raise the suspension height. If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height.

How do you jack up a 4×4?

Does LR4 have full size spare?

– Doesn’t the HD LR4 have a full-sized spare tire? Yes.

Does a Range Rover have a spare tire?

2016 Range Rover Always secure the spare wheel, or the removed wheel, in the correct position, using the retaining bolt. Do not stow the wheel while the vehicle is raised on the jack. After wheel changing, always secure the tools, jack and replaced wheel in their correct stowage positions.

How do you remove a discovery spare wheel?

How do you remove a locking wheel nut from a Range Rover?

Locate the wheel brace over the locking wheel nut adaptor. Unscrew the wheel nut half a turn counter-clockwise. After raising the vehicle on the jack, remove the locking wheel nut.