How do you reset service light indicator Land Rover LR3. Hold down the reset button on the dashboard to reset the LR3 trip counter. Keep holding the reset button down even after the trip counter has cleared. Turn the ignition key to the II position on the ignition.
Also, how do you calibrate a LR3 suspension?
Additionally, how do you turn off air suspension on a Land Rover LR3? The air suspension in the Land Rover LR3 is enabled though a compressor but is not a feature that can be switched off. The LR3 does not come equipped with a switch to dis-engage the air suspension.
Also know, how do you reset suspension height on a Range Rover? Selecting a new height using the raise/lower switch 1, or driving off will reset the system. If the vehicle is grounded and traction control is activated, Extended mode is activated automatically to raise the vehicle clear.
People also ask, how do you reset the service indicator on a Land Rover Discovery 3?
Contents
How do I reset my discovery 3?
How does Land Rover air suspension work?
How Land Rover Air Suspension Works. The air suspension system in a Land Rover is intricately designed. The suspension has an electronic control system that allows the driver to make adjustments in the suspension. This is accomplished by means of four compressors connected to each individual air strut.
How do you lock a Range Rover suspension?
2016 Range Rover Make sure that the suspension height is set at the access height setting or the normal height setting. Make sure that the vehicle is travelling at a speed of less than 35 km/h (22 mph). Press the down button (2) for longer than 1 second, to lock the vehicle at access height.
How do you fix a suspension on a Range Rover?
How do you jack up a Land Rover lr3?
How do you jack up a Range Rover with air suspension?
Turn the jack lever (2) clockwise to raise the jack, until it locates into the jacking point. Make sure that the base of the jack is in full contact with the road surface. Raise the vehicle with the jack, until the tyre being lifted just clears the ground. Operate the jack with a slow and steady motion.
How do you jack up a car with air suspension?
Just jack it up like normal from ride height. Of course, you can air up higher if you need the clearance. If you’re doing any suspension work, dump the pressure once it’s on jack stands.
How do you turn Range Rover air suspension off?
If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height. If a door is open, press and hold to lower the suspension height.
What does suspension fault mean on Land Rover?
If the fault becomes active when the suspension is at “normal” height, the suspension is locked, preventing it from raising or lowering with a warning message “Normal Height Only”. If the suspension is lowered when the fault becomes active, it fails to raise and the warning message to not exceed 35 MPH is shown.
What is HDC inactive?
A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.