How to reset p38 key fob?

Another frequent question is, how do you reset a Land Rover key fob? Put the key in the driver door. Turn it to lock while pressing the lock pushbutton. Hold for 5 seconds. Turn to unlock, press unlock and hold 5 seconds.

Also know, how do you resync a Range Rover key fob?

1. Enter the vehicle and make sure that all doors are shut and locked.
2. Insert the new key into the ignition switch.
3. Turn the key to position 1.
4. Within 25 seconds perform the following steps.
5. Press and hold the unlock button on the remote.
6. Press the lock button 3 times.

Likewise, how do I reset my key fob after replacing the battery?

1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
2. STEP 2-Press the lock button.
3. STEP 3-Turn off the ignition.
4. STEP 4-Repeat the process with other key fobs.
5. STEP 5-Restart the process.

Also, how do I enter EKA code P38?

1. Using the ignition key insert it into the drivers door lock.
2. Turn the key anticlockwise to the locking position and back to the central position 4 times.

How can I get my Eka Code Range Rover P38?

The EKA code is found on the security information card supplied with your vehicle. The code is 4 digits long. The EKA code IS NOT the code in the key fob. The grey plastic tag on the keys IS NOT the EKA code, it is the ignition key code.

How do you start a Range Rover with a dead key fob?

How do I program my Land Rover Discovery 3 KEY?

Will disconnecting car battery reset key fob?

Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.

How do I reprogram my key fob for push start?

How do you reset a key fob?

Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.

How do you bypass the immobilizer on a Land Rover Discovery?

How do I get an emergency key access code?

The EKA code is found on the security information card supplied with your vehicle. The code is 4 digits long. The EKA code IS NOT the code in the key fob. The grey plastic tag on the keys IS NOT the EKA code, it is the ignition key code.

How do I enter Immobiliser code?

1. Using the key, turn the. driver’s door lock (clockwise),
2. Enter the FIRST digit of the code. If the first digit is 4, turn the.
3. Enter the SECOND digit of the code.
4. Enter the THIRD digit of the code.
5. Enter the FOURTH digit of the code.
6. Finally, turn the key to the.

How do you unlock a Range Rover without a key?