HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.
Furthermore, where is the HDC button? The HDC button is located on the centre console. The speed limits for the HDC system are adjusted via the control buttons mounted on the right side of the steering wheel. Dependent on the vehicle’s specification, the HDC button also operates the All Terrain Progress Control (ATPC) system.
People also ask, how do you turn off the HDC on a 2012 Range Rover Evoque?
- Press to switch HDC on and off.
- Press to increase the set speed.
- Press to decrease the set speed.
Also, how does Hill Descent Control Work Land Rover? Hill Descent Control reduces the wasted braking potential by changing braking pressure to each wheel, which means each is then braked to its traction limit. The driver sets a descent speed, and the computers take care of the rest. The speed of the car is calculated from averaging the speeds of each of the four wheels.
Also know, what is HDC Land Rover? Land Rovers feature the HDC, which stands for Hill Descent Control system. … When the HDC is turned on, the vehicle will use the anti-lock braking system during descent to control the speed of each wheel on the vehicle. The driver can use cruise control to adjust the speed to a level that is comfortable.Hill Descent Control helps your vehicle maintain a set speed as you drive downhill on an incline. … This is especially useful for off-road driving, where the ground can be uneven, and gaining speed on a slope can be dangerous.
Available Hill Descent Control is essentially a cruise control system that uses traction control technology with anti-lock brakes. This system continually adjusts braking pressure to help control slippage and maintain a constant preset speed while you are going down a steep grade.
How do you turn off Hill Descent Control Evoque?
HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.
What is the difference between Hill Assist and Hill Descent Control?
Hill Descent Control can be used when navigating steep inclines, particularly in rough terrain, which can put your vehicle at risk. Hill Start Assist is useful in any situation where you’re stopped on a hill, particularly so in bumper to bumper traffic, or driving a steep driveway or ramp.
What is Hill Descent Control fault?
Hill Descent Control FAULT. Displays when a hill descent system fault is present. Hill Descent Control OFF System Cooling. Displays when hill descent control mode disables to cool the brake system.
What vehicles have Hill Descent Control?
- Alfa Romeo (Stelvio)
- Aston Martin (DBX)
- Audi (A4 Allroad, A6 Allroad, E-Tron, Q3, Q5, Q7, Q8)
- Bentley (Bentayga)
- BMW (X1, X2, X3, X4, X5, X6, X7)
- Chevrolet (Colorado, Tahoe, Silverado, Suburban)
- Ford (Explorer, Expedition, F-150, Super Duty)
- Genesis (GV80)
How do I turn off ATPC?
Press and release the ATPC button again to disable the system. The button’s LED lamp and the ATPC warning lamp extinguish to confirm. The message center also displays an ATPC off confirmation message. ATPC operation is influenced by the current terrain response driving program selection.
What causes HDC fault Land Rover?
Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.
What does vehicle lean when cornering mean?
You must stop the vehicle as soon as safety permits and switch off the engine. … If the warning icon is AMBER and accompanied by the message VEHICLE LEAN WHEN CORNERING, a fault that will result in reduced Dynamic Response performance has been detected.
What is Hill Descent control focus?
The Descent Control feature on the Ford Focus will automatically engage the brakes when travelling down a hill or incline. … Locate the Hill Descent control button. It’s usually located above the center console display. The feature is also automatically disabled if the vehicle exceeds 40mph.
Why is my downhill assist light on?
The vehicle speed is higher than 15 mph. If the accelerator or brake pedal is depressed, the downhill assist control system will stop operating with the downhill assist control system indicator still on.