Land Rover Defender

How to reset service light land rover defender?

  1. Turn the ignition key to the “ON” position without starting the engine.
  2. Press and hold the accelerator and brake pedals all the way down until the Oil Indicator blinks.
  3. When the Oil Indicator blinks, turn off the ignition.

Additionally, how do I reset my Defender 2020? The radio power button can be used as well (unless that’s what you’re referring to). Hold for 15 seconds and it triggers a reboot which takes a couple of minutes.

Likewise, how do you reset the oil light on a 2006 Land Rover?

Also, how do you reset the maintenance light on a 2016 Range Rover?

Furthermore, how do you reset the oil light on a 2011 Land Rover? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Contents

How do I get my Range Rover out of valet mode?

  1. From the Home menu screen, select Valet.
  2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
  3. Valet mode activated is displayed to indicate that a PIN has been accepted.

How do I reset my PIVI pro?

To reboot Pivi, simply hold the power/volume button for as long as needed (30”).

How do you reset a Range Rover?

  1. Go to Settings menu.
  2. Select “Backup & Reset”, select “Factory data reset”
  3. Select “Reset phone” and “Erase everything”
  4. The device will then reboot.

How do you reset the service light on a 2006 Range Rover Sport?

How do you reset the service light on a Land Rover Discovery 2017?

How do you reset the service light on a 2008 Range Rover?

How do you reset the service light on a 2015 Range Rover?

  1. Key on, engine OFF.
  2. Open door.
  3. Open bonnet (hood)
  4. Depress the accelerator pedal simultaneously for ten seconds, release.
  5. service interval is now reset.

How do you reset the service light on a 2014 Range Rover?

  1. Open the bonnet.
  2. Turn the ignition key to the “ON” position without starting the engine.
  3. Open the driver’s door.
  4. Hold the accelerator and brake pedals all the way down.
  5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a 2015 Range Rover Sport?

How do you reset the service light on a 2011 Range Rover?

See also:   How to remove land rover defender transfer box?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!