The good news is that the series II Discovery is much more reliable than most other Land Rovers. However, it’s still below average for its class, although only by a little.
Amazingly, can you LS swap a Land Rover? The standard LS Conversion Kit contains everything you need to swap your Rover V8 for a GM LS engine in about the same amount of time as swapping the factory engine. You don’t have to go to the complicated trouble of replacing the transmission, transfer box, and driveshafts. … See reasons for choosing our LS Swap kits.
Also the question Is, what is the most popular engine swap?
- Small block Chevrolet V8.
- Honda B-Series VTEC.
- Volkswagen 1.8 R4 20VT.
- Subaru EJ207.
- General Motors LS V8.
Also know, what is the best V8 engine to swap? Today the Ford 5.0 ‘Coyote’ engine is considered one of the best all-round V8s – producing well over 400 horsepower from the factory. For those with enough budget, the Coyote has become a popular swap option for restomod, pro touring and race builds.
Moreover, which Discovery engine is best? The P360 petrol version takes the title for best performer in the Discovery range. Its 3.0-litre straight six unit produces 355bhp and manages the 0-62mph sprint in 6.5 seconds, before topping out at a 130mph maximum.
Contents
How many miles will a Land Rover Discovery last?
Depends on lots of things…. but generally if you take good care of it, it could last of 3 to 4 hundred thousand miles…
Is the 4.8 A LS motor?
The LR4 is a 4.8L iron block truck engine that was introduced in 1999. Along with the LM7 and LQ4, they were the first LS truck engines. … The 4.8L engine is also known as the Vortec 4800. The engine specs and information here is for a stock LR4 engine.
What did the LM4 come in?
The LM4 was introduced in 2003 as a lightweight version of the LM7. It was available in GM SUVs until 2005. The LM4 was also known as the Vortec 5300.
Are LS swaps worth it?
There’s no doubt that there are several advantages to an LS swap in some vehicles. They can be affordable, super reliable, and make a ton of torque and power. If you have the time, money, and skill, we say go for it.
How do I choose an engine swap?
- Do your research ahead of time.
- Find the right partners for custom parts.
- Consider how more horsepower changes the rest of the car.
- Make sure the engine isn’t too heavy.
- Get all the other parts you need to make the engine work.
- Put safety first.
- Only start a swap you know you can finish.
What are the easiest cars to engine swap?
- 2000-2005 Toyota MR2 Spyder. Toyota.
- 2006-2010 Pontiac Solstice.
- 1999-2005 Lexus IS300.
- 2003-2012 Mazda RX-8.
- 1996-2001 Audi A4 (B5)
- 2002-2006 Acura RSX.
- 2003-2007 Infiniti G35.
- 2002-2008 Nissan 350Z.
What LS is best for swap?
If you’re planning on boosting your project the 4.8L truck engine will be perfect for you. The 4.8L can take insane amounts of boost completely stock and will really perform well. If you don’t want a barebones 5.3L or 4.8L you could always step up to a 6.2L truck block which is based on the LS3 engine.
What else should I replace When replacing an engine?
Timing belts/chains, water pump, thermostat, spark plugs, fluids, and seals are routine maintenance items and should be replaced at the time of installation and at the vehicle manufacturer’s recommended service intervals.
What cars have a 6.0 LS engine?
- Chevrolet Express/GMC Savana.
- Chevrolet Silverado 2500 Pickup, 3500 Pickup, Crew Cab, and Chassis Cab/GMC Sierra 2500 HD Pickup and Crew Cab, C3, Denali, and 3500 Pickup and Chassis Cab, 1500HD Crew Cab.
- Chevrolet Suburban/GMC Yukon XL Denali.
- Hummer H2.
- GMC Yukon Denali.
Who makes discovery engine?
The engines sourced from Ford were replaced by engines from Jaguar Land Rover’s new Ingenium engine line from late 2015. The Ingenium family is a range of modular four cylinder turbocharged engines of 2.0-litre capacity, built around individual 500cc cylinders.