Make sure the vehicle’s ignition is switched off, and the lighting switch is in the Off position (1). Switch the vehicle’s ignition on. See SWITCHING ON THE IGNITION. Turn the lighting switch to the Low beam headlamps on position (3).
Also, how do I turn on my daytime running lights?
- Have the ignition in the on position.
- Turn the headlights off, or put them in parking light mode, or auto light mode.
- The system should automatically turn on if these conditions are met.
People ask also, how do you turn on the headlights on a Land Rover Discovery?
- With the headlights on, push the lighting control away from the steering wheel to select high beam.
- Pull the lighting control towards the steering wheel and release to flash the high beam on and off.
- Side lights: Rotate the lighting control to this position to switch the side lights on.
Subsequently, how do you turn on the automatic lights on a Range Rover?
Correspondingly, how do I reset my Discovery 4? In brief, to start the hard reset process, open the hood but close all doors and let your 3 go to sleep – no radio display etc and no key in the ignition. This will take a couple of minutes and do not open any doors until the reset is completed.Often, you’ll find daytime running lights on the front end of a vehicle near the headlights. Many vehicles actually have daytime running lights built into the headlight housing.
Contents
Do daytime running lights come on automatically?
Daytime running lights (DRLs) are designed to make your vehicle more visible in bright, daytime conditions. They should come on automatically when you start your engine.
How do you turn daytime running lights on Discovery sport?
Press and hold the rear fog lamp switch (8) for more than 2 seconds. Release the rear fog lamp switch. Turn the lighting switch to the Low beam headlamps on position (3). Turn the lighting switch back to the Off position (1).
How do you turn off the lights on a Land Rover?
How do you turn on the lights on a Range Rover Evoque?
- With the headlamps on, push the control away from the steering wheel to select high beam.
- Pull the control towards the steering wheel and release to flash the high beam on and off.
- Sidelights.
- Headlamps.
- AUTO.
- Rear fog lamps.
- Front fog lamps.
How do you turn off auto bright on a Range Rover?
To return to Auto high beam, push the stalk to the high beam position (1) and then return it to the central position. To turn off Auto high beam, turn the main lighting control from AUTO to headlamps. This feature can be disabled/enabled via the Vehicle Set-up menu. See INSTRUMENT PANEL MENU.
How do you adjust the lights on a Range Rover?
Adjust the height of the low beam and high beam on my Land Rover Range Rover Evoque. So once the mark hung on the wall open the hood of your Land Rover Range Rover Evoque to adjust the headlights. Locate the screw near the optic and adjust by turning right to left to adjust the height.
What is HBA Sensitivity Range Rover?
The AHBA feature automatically selects and deselects high beam under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient light drops below a predetermined level. Auto high beam sensitivity can be adjusted via the Vehicle settings menu.
How do you reset a Land Rover Discovery screen?
- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
How do you reset a Land Rover Discovery?
Turn the ignition key to the “ON” position without starting the engine, If your car has push-button start, press the “Start” button without touching the brake pedal. Open the driver’s door. Hold the accelerator and brake pedals all the way down until you see SERVICE RESETTING in the dash.
How do you reset a Land Rover to factory settings?
- Go to Settings menu.
- Select “Backup & Reset”, select “Factory data reset”
- Select “Reset phone” and “Erase everything”
- The device will then reboot.