- Push the button to the side of your key fob and pull out the emergency key blade.
- Use the emergency key blade to pry the smart key case open.
- Remove the old battery and insert a new CR2032 type battery with the positive side upward.
Furthermore, do I have to reprogram my key fob when I change the battery? The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. This is why nothing is working with the key fob. After replacing the battery in the key fob remote, you will need to reprogram the remote to the vehicle.
Also, what battery does a Land Rover key use? The type of Land Rover key fob battery you’ll need is a CR2032 battery, which you can find at any hardware store around the Middletown and Wilmington areas. If you have trouble locating one, you can also visit our parts center at Land Rover Wilmington for assistance.
Similarly, how do you change the battery in a 2011 Range Rover sport key fob?
Also the question Is, where is the battery in a Land Rover Discovery?
Contents
How do you reset a Land Rover Discovery battery?
In brief, to start the hard reset process, open the hood but close all doors and let your 3 go to sleep – no radio display etc and no key in the ignition. This will take a couple of minutes and do not open any doors until the reset is completed.
Will disconnecting car battery reset key fob?
Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.
Can a dead car battery cause the key fob not to work?
While there are a few different reasons that a keyless entry remote might stop working, most of them are pretty easy to check yourself. The most common problem with these car key fobs is that the batteries just go dead over time, in which case replacing the battery should fix the problem.
How do you change battery in car key?
How do you change the battery in a Land Rover Discovery 2 key fob?
How do I reprogram my Land Rover key fob?
- Stand outside of the Range Rover with all of the doors of the vehicle closed. On the integrated remote fob and key unit, hold down the “Lock” button continuously.
- Continue to keep the “Lock” button of the fob held down. Rotate the key clockwise in the door lock.